{"title":"Distortion and Overdrive","description":"","products":[{"product_id":"wmd-devices-acoustic-trauma-analog-distortion-machine-pedal","title":"WMD Devices Acoustic Trauma Analog Distortion Machine Pedal","description":"\u003cp\u003eThe new WMD Acoustic Trauma is the ultimate analog distortion machine. Two specially voiced preamps give light break up to full stack overdrive to huge sustaining crunch. Those preamps drive a 3 band boosting parametric EQ to voice your tone in any way. Then, a powerful and transparent noise gate kills the noise caused by incredible gain.\u003c\/p\u003e\r\n\u003cdiv\u003e\r\n  \u003cdiv\u003e\n\u003cbr\u003e\r\n  \u003c\/div\u003e\r\n  \u003cdiv\u003eThe Acoustic Trauma can produce the most massive sounds from a pedal. It is capable of causing hearing damage due to the high peaking nature of the EQ bands. This is your solution to cut through the mix, or make your fans writhe in pain.\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv\u003e\n\u003cbr\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv\u003e\n\u003cb\u003eControls\u003c\/b\u003e \u003c\/div\u003e\r\n\u003cdiv\u003e\r\n  \u003cdiv\u003eStomp Switch - This footswitch activates the Acoustic Trauma. The large red LED will light and your face will be pummeled.\u003c\/div\u003e\r\n  \u003cdiv\u003e\n\u003cbr\u003e\r\n  \u003c\/div\u003e\r\n  \u003cdiv\u003eCool Preamp - The leftmost preamp is a nice low-medium gain overdrive stage with very smooth clipping. It cleans up well when guitar volume is rolled down.\u003c\/div\u003e\r\n  \u003cdiv\u003e\n\u003cbr\u003e\r\n  \u003c\/div\u003e\r\n  \u003cdiv\u003eHot Preamp - This preamp is designed to just get louder and add sustain. It is not designed to clean up, just to rock. You will find that the more you turn the gain up, it will just crunch a little more but the tone doesn't change. It just adds sustain.\u003c\/div\u003e\r\n  \u003cdiv\u003e\n\u003cbr\u003e\r\n  \u003c\/div\u003e\r\n  \u003cdiv\u003ePreamp Blend - Use this to blend the dry preamp sounds to the output, bypassing the EQ stages. Note that the phase relationships change when analog filters are used, so blending the dry signal may produce out of phase sounds and frequency canceling.\u003c\/div\u003e\r\n  \u003cdiv\u003e\n\u003cbr\u003e\r\n  \u003c\/div\u003e\r\n  \u003cdiv\u003e\u003cb\u003eThe EQ\u003c\/b\u003e\u003c\/div\u003e\r\n  \u003cdiv\u003e\r\n    \u003cdiv\u003eThere are 3 bands of EQ with frequency ranges from about 40Hz to 15kHz. Each band is an independent bandpass filter with adjustable center frequency, quality factor, and gain. Use them knobsto sculpt your tone like a surgeon.\u003c\/div\u003e\r\n    \u003cdiv\u003e\n\u003cbr\u003e\r\n    \u003c\/div\u003e\r\n    \u003cdiv\u003eFreq - This selects the center frequency of the filter.\u003c\/div\u003e\r\n    \u003cdiv\u003e\n\u003cbr\u003e\r\n    \u003c\/div\u003e\r\n    \u003cdiv\u003eQ - The Quality Factor (Q) gives you control over the sharpness of the filter. Turn it up and the filter section becomes resonant and more abrasive. Low Q settings sound like a traditional EQ, higher Q adds resonant nodes. The Q ranges from about .1 to around 30.\u003c\/div\u003e\r\n    \u003cdiv\u003e\n\u003cbr\u003e\r\n    \u003c\/div\u003e\r\n    \u003cdiv\u003eGain - This controls how much signal goes to the EQ section. Adjust to taste.\u003c\/div\u003e\r\n  \u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv\u003e\n\u003cbr\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv\u003e\u003cb\u003eSumming State \/ Clip LED\u003c\/b\u003e\u003c\/div\u003e\r\n\u003cdiv\u003eIf any EQ stage or the summing stage (Triangle with the +) begins to distort, this LED will begin to light up. And you'll hear the distortion. It's not generally a pleasant sound, so we wanted to make it easier to avoid.\u003c\/div\u003e\r\n\u003cdiv\u003e\n\u003cbr\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv\u003e\u003cb\u003eNoise Gate\u003c\/b\u003e\u003c\/div\u003e\r\n\u003cdiv\u003e\r\n  \u003cdiv\u003eThe noise gate is a powerful and transparent way to squelch the noise coming from the intense gain of the Acoustic Trauma.\u003c\/div\u003e\r\n  \u003cdiv\u003e\n\u003cbr\u003e\r\n  \u003c\/div\u003e\r\n  \u003cdiv\u003eGate Threshold - Use this to set the level that the gate will open and the level where it will close. Adjust to taste relative to the level of your guitar.\u003c\/div\u003e\r\n  \u003cdiv\u003e\n\u003cbr\u003e\r\n  \u003c\/div\u003e\r\n  \u003cdiv\u003eNoise Reduction - Controls the level of noise reduced by the gate. All the way up will completely silence noise if the gate is closed.\u003c\/div\u003e\r\n  \u003cdiv\u003e\n\u003cbr\u003e\r\n  \u003c\/div\u003e\r\n  \u003cdiv\u003eWhen not using the gate, you should turn both knobs all the way down, otherwise the gate will act as an expander, boosting the level coming out when the gate opens up.\u003c\/div\u003e\r\n  \u003cdiv\u003e\n\u003cbr\u003e\r\n  \u003c\/div\u003e\r\n  \u003cdiv\u003eWatch the LED for the level of attenuation. The LED will be fully lit when the gate is fully open.\u003c\/div\u003e\r\n  \u003cdiv\u003e\n\u003cbr\u003e\r\n  \u003c\/div\u003e\r\n  \u003cdiv\u003eInternal Controls - The noise gate has two internal controls. The blue trim pot marked \"R\" sets the release time. It is set to what we think is optimal, you may adjust this if you would like. The other trim pot sets the gate bias which removes clicking from the control signal. It is calibrated at the factory. Do yourself a favor and leave it alone.\u003c\/div\u003e\r\n  \u003cdiv\u003e\n\u003cbr\u003e\r\n  \u003c\/div\u003e\r\n  \u003cdiv\u003e\u003cb\u003eWarranty and Other Stuff\u003c\/b\u003e\u003c\/div\u003e\r\n  \u003cdiv\u003e\r\n    \u003cdiv\u003ePower Supply \u0026amp; Jack - No batteries for this pedal since 9 volts just didn't sound good enough for us. We supply you with an 18VDC wall supply. The supply is Center Positive (+), which is NOT the standard BOSS style. DO NOT USE ANY OTHER SUPPLY WITH THE ACOUSTIC TRAUMA. And we recommend you not use our 18V supply with any other pedal. You will let the magic smoke out if you do.\u003c\/div\u003e\r\n    \u003cdiv\u003e\n\u003cbr\u003e\r\n    \u003c\/div\u003e\r\n    \u003cdiv\u003eWarranty - We guarantee the Acoustic Trauma against manufacturer defects for 1 full year from date of purchase. Please let us know if you experience problems. We will always get you taken care of.\u003c\/div\u003e\r\n  \u003c\/div\u003e\r\n\u003c\/div\u003e\r\n","brand":"WMD Devices","offers":[{"title":"Default Title","offer_id":48498192,"sku":"","price":299.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/atboxbig.jpg?v=1279025684"},{"product_id":"wmd-devices-arcane-preamp-distortion-pedal","title":"WMD Devices Arcane Preamp Distortion Pedal","description":"\u003cdiv\u003e\n\u003cdiv\u003eThe Arcane Preamp is a two channel pedal. The first channel is a low gain boost that brings out the soul of your single coil pickups and can add a little dirt like a good low gain tube amp. The right-side footswitch activates the Fuzz-Channel indicated by the Fuzz channel's LED being blue. The Fuzz channel has tons of gain and an amp style EQ for taming its tone.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe Boost Channel drives the Fuzz Channel, so the gain of the Boost Channel affects the gain of the Fuzz Channel. The gain of the Fuzz Channel is very high so even low Boost gains can yield very fuzzy tones in the Fuzz Channel.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cb\u003eFeatures:\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003eBass Mid and Level and gain controls\u003c\/li\u003e\n\u003cli\u003eStandard 9V Power Jack\u003c\/li\u003e\n\u003cli\u003e100% True Bypass\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"WMD Devices","offers":[{"title":"Default Title","offer_id":48693692,"sku":"wmd-arcane","price":219.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/arcanepreampbox.jpg?v=1279155159"},{"product_id":"wmd-devices-geiger-counter-civilian-issue-distortion-and-bitcrusher-pedal","title":"WMD Devices Geiger Counter Civilian Issue Distortion and Bitcrusher Pedal","description":"\u003cdiv\u003eThe WMD Geiger Counter - Civilian Issue is 32 killer sounds from the original Geiger Counter. We stripped off the majority of the controls and took $100 off the price. This is for those players who want to dial in a tone quickly and save pedalboard space.\u003c\/div\u003e\r\n\u003cdiv\u003e\n\u003cbr\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv\u003e\r\n  \u003ccenter style=\"text-align: left;\"\u003e\u003cspan\u003e\u003cb\u003eThe Controls\u003c\/b\u003e\u003c\/span\u003e\u003c\/center\u003e\r\n  \u003cp\u003e\u003cspan\u003eStomp Switch - \u003c\/span\u003eLike all WMD pedals, the GCCI (Geiger Counter Civilian Issue) is handwired and true bypass, so it won't affect your tone when disabled. When the GCCI is on, the red LED will be lit.\u003c\/p\u003e\r\n  \u003cp\u003e\u003cspan\u003eGain - \u003c\/span\u003eThe gain control provides anywhere from a nice clean tone to a ton of overdrive. Use this to hit the Function tables harder or softer to produce different amounts of harmonics.\u003c\/p\u003e\r\n  \u003cp\u003e\u003cspan\u003eTone - \u003c\/span\u003eThe tone control can be used to fine tune the harmonic content from the Function tables. Use lower settings for fewer upper level harmonics.\u003c\/p\u003e\r\n  \u003cp\u003e\u003cspan\u003eFunction - \u003c\/span\u003eTwisting this knob will cause the number on the display to change. It goes 0 to 9 and A to F. This selects the 16 presets inside the GCCI. Push the knob in to activate the Low Fidelity mode for each preset. Low Fidelity mode is indicated by the decimal point on the display.\u003c\/p\u003e\r\n  \u003cp\u003eEach Function recalls parameters from the original Geiger Counter including the Bit Depth, Sample Rate and the Wave Table. The wave tables are displayed in the manual. As your guitar string swings up and down, the wave table is played left to right from the center. The output is what's vertically on the graph. The more movement in the Function, the more harmonic content you'll get out.\u003c\/p\u003e\r\n  \u003cp\u003e\u003cspan\u003eVolume - \u003c\/span\u003eSets the output volume of the GCCI which can be up to 5Vpp, enough to really crush your amp's input stage.\u003c\/p\u003e\r\n  \u003cp\u003e\u003cspan\u003eBattery \u0026amp; 9VDC Jack - \u003c\/span\u003eWMD recommends using a 9V BOSS style power adapter (2.1mm Center Negative). A battery snap is provided, but is recommended for power supply backup only as the GCCI uses a lot of power (about 40mA). A battery could last as little as 5 hours.\u003c\/p\u003e\r\n  \u003cp\u003e\u003cspan\u003eWarranty - \u003c\/span\u003eAll WMD pedals are warranted against manufacturing defects for one year from date of purchase. Please contact us if you think your pedal is experiencing difficulties.\u003c\/p\u003e\r\n\u003cbr\u003e\r\n\u003c\/div\u003e\r\n","brand":"WMD Devices","offers":[{"title":"WMD Devices Geiger Counter Civilian Issue Distortion and Bitcrusher Pedal","offer_id":49437422,"sku":"","price":199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/gccibox_1.jpg?v=1279979727"},{"product_id":"wmd-device-geiger-counter-digital-destruction-distortion-pedal","title":"WMD Device Geiger Counter Digital Destruction Distortion Pedal","description":"\u003cdiv\u003eThe WMD Geiger Counter is hundreds of entirely new face melting sounds. A high gain modern preamp drives an 8 bit computer, creating sounds which range from nice (tubey overdrive, lofi aliasing, hot gated leads) to total madness (impossible amounts of gain, multiple octave foldover, harsh digital data errors, and piercing sculpted noise). This is NOT a modeling pedal, it turns the fundamentals of digital into a source of extreme distortion.\u003c\/div\u003e\n\u003cdiv\u003e\n  \u003cp\u003e\u003cspan\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eHigh Gain Modern Preamp\u003c\/li\u003e\n    \u003cli\u003eDramatic Tone Control with Disable\u003c\/li\u003e\n    \u003cli\u003eSample Rate from 260Hz to 58kHz\u003c\/li\u003e\n    \u003cli\u003e1 to 8 Bit Depth with Mask mode\u003c\/li\u003e\n    \u003cli\u003e252 Wave Table Modulator\u003c\/li\u003e\n    \u003cli\u003eCV In for Expressive Control\u003c\/li\u003e\n    \u003cli\u003eAlways saves settings\u003c\/li\u003e\n    \u003cli\u003eHand Wired True Bypass\u003c\/li\u003e\n    \u003cli\u003eTop Quality Components\u003c\/li\u003e\n    \u003cli\u003eSuper Hard Epoxy Powder Finish\u003c\/li\u003e\n    \u003cli\u003eStandard 9V Power Jack\u003c\/li\u003e\n    \u003cli\u003e4.5\" x 3.5\" Small Footprint\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cdiv\u003e\n    \u003cp\u003e\u003cspan\u003eThe Controls.\u0026nbsp;\u003c\/span\u003eThe Geiger Counter may seem overwhelming, but once broken down, the controls are quite logical.\u003c\/p\u003e\n    \u003cp\u003e\u003cspan\u003eGain.\u003c\/span\u003e\u0026nbsp;Low settings provide clean tones with no distortion at all, while high settings will brickwall your signal for great sustain. Use the Gain control as a coarse setting for getting the desired tone from the selected wave table.\u003c\/p\u003e\n    \u003cp\u003e\u003cspan\u003eTone.\u003c\/span\u003e\u0026nbsp;The Geiger Counter's tone control blends muffled low-mids with chimey and clear upper mids and highs providing a very large range of sounds in junction with the Gain. All the way down and the sound is muffled and grungy with little upper harmonic content. The middle range is smooth and full bodied. The top range cuts the lows completely for only upper harmonic content. Use the Tone to fine tune the sound of the wave table.\u003c\/p\u003e\n    \u003cp\u003e\u003cspan\u003eTone Enable\/Disable.\u003c\/span\u003e\u0026nbsp;This switch removes the tone control from the preamp circuit. The tone control sucks some volume from the gain, and this allows the pure ultra hot signal to go directly into the Wave Table. If a very clean tone is desired, set to Disable and adjust the gain to get the right amount of breakup. For most wave tables, disabling the Tone will produce completely different sounds by brickwalling to the extremes of the tables faster.\u003c\/p\u003e\n    \u003cp\u003e\u003cspan\u003eSample Rate.\u003c\/span\u003e\u0026nbsp;Controls the length of the samples your signal is converted into. Full up and the Geiger Counter samples faster than a CD. Dial it down a little and you'll lower the fidelity and frequency response, adding overtones and difference frequencies. Down a little produces some very nice chimey clean tones. Down more and higher notes disappear into difference frequencies, all the way down to 280Hz. The sample rate is sort of like a flange whammy.\u003c\/p\u003e\n    \u003cp\u003eThe LED by the Sample Rate knob shows the key input and coarse\/fine modes. When green, the Key input is active. When red, the sample rate is changed in smaller increments (fine mode), allowing for smoother adjustment for the high range of sample rates. The LED is yellow if the key input and fine mode are both active. Push the Wave Table knob to change the modes of the Bit Depth and Sample Rate LEDs.\u003c\/p\u003e\n    \u003cp\u003e\u003cspan\u003eBit Depth.\u003c\/span\u003e\u0026nbsp;This controls the finer details of the signal. All up and your signal is represented by the full 8 bits. Each step down cuts the resolution in half, adding quantization error distortion, all the way down to 1 bit making a nasty square wave from a once clean tone. This produces a lo-fi gated distortion sound.\u003c\/p\u003e\n    \u003cp\u003eThe LED by the Bit Depth knob shows the key input and post\/pre wave table modes. When green, the key input is active. The Bit Depth function is available before (LED red) or after (LED off) the wave table algorythms for different sounds. Use the bit depth before wave table mode to change the response of the wave table. The LED is yellow if the key input and pre wave table modes are both active.\u003c\/p\u003e\n    \u003cp\u003e\u003cspan\u003eBits\/Mask.\u0026nbsp;\u003c\/span\u003eThis switch controls how the Bit Depth knob works. In Bits mode, the Bit Depth knob reduces the resolution of the signal. In Mask mode, the signal is filtered through a number (0 to 255). This mode can be used to reduce noise and add gain. In pre wave table mode, it can turn off small ranges of the wave table, creating altered harmonic content from the tables. Adjust the knob to taste when in Mask mode.\u003c\/p\u003e\n    \u003cp\u003e\u003cspan\u003eWave Table.\u003c\/span\u003e\u0026nbsp;This knob and display select the wave table to run your signal through. The wave table stage takes your signal and destroys it with math. This produces some incredible sounds. The wave tables are organized so that a more extreme version is typically found one up from the current one. There are 252 wave tables in all, each with different harmonic content.\u003c\/p\u003e\n    \u003cp\u003eThe display is in HEX, displaying the numbers 0-9 and the letters A-F. Don't be alarmed, it actually makes remembering your desired wave table easier! The wave table is remembered when the pedal is turned off.\u003c\/p\u003e\n    \u003cp\u003e\u003ca href=\"http:\/\/www.wmdevices.com\/GeigerCounterWaveTables.pdf\"\u003eHere\u003c\/a\u003e\u0026nbsp;is a pdf of all 252 wave tables.\u003c\/p\u003e\n    \u003cp\u003e\u003cspan\u003eKey\/CV Input.\u0026nbsp;\u003c\/span\u003eThe Key Input is a CV (control voltage) control over the Sample Rate, Bit Depth or both simultaniously. A slow LFO creates some incredible sweeping difference frequencies when modulating the sample rate, a faster LFO creates some cool tremolo sounds when modulating the bit depth. Use an expression pedal for direct control. The CV input has a 5.6 volt output on the ring of the CV jack, 0 volts on the sleeve and the CV input on the tip. Use any standard expression pedal or any 0-5 volt CV source for modulation. The 5.6 volt output will be shorted and will degrade battery life if a mono cable is used, but it will not damage the Geiger Counter.\u003c\/p\u003e\n    \u003cp\u003e\u003cspan\u003eCV Adaptors.\u0026nbsp;\u003c\/span\u003eIf your modular setup uses +-2.5 or +-5 volt CV signals, WMD has a cable adapter that adjusts the signal level to the needed 0-5 volts to work with the Geiger Counter. This allows for most modular gear, +-5 volts, and Moogerfooger type CV, +-2.5 volts to work properly. If you have other voltage requrements we can do that too. Please contact us\u0026nbsp;to order and for more information. These are all built to order to meet your specific needs. These adapters sell for $30.\u003c\/p\u003e\n    \u003cp\u003e\u003cspan\u003eSample Rate Key In.\u0026nbsp;\u003c\/span\u003eIn normal mode (LED not green) the knob controls the sample rate directly. Turn it green and the key input controls the Sample Rate. Turn the knob all the way up and the key input has direct control. Dial it down to introduce variations and interesting patterns in the sample rate.\u003c\/p\u003e\n    \u003cp\u003e\u003cspan\u003eBit Depth Key In.\u0026nbsp;\u003c\/span\u003eIn normal mode (LED not green) the knob controls the bit depth directly. If green, the key input controls the bit depth. With the knob all the way up, the key in will have smooth control. Dial it down to introduce graininess and patterns from the key input. Key input works with both bits and mask modes.\u003c\/p\u003e\n    \u003cp\u003e\u003cspan\u003eManual.\u003c\/span\u003e\u0026nbsp;The manual that ships with the Geiger Counter is available\u0026nbsp;\u003ca href=\"http:\/\/www.wmdevices.com\/GeigerCounter.pdf\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n    \u003cp\u003e\u003cspan\u003eSound Samples.\u0026nbsp;\u003c\/span\u003eWe have added a page of sound samples with example settings.\u0026nbsp;\u003ca href=\"http:\/\/www.wmdevices.com\/gcsoundsamples.php\"\u003eClick here for Sound Samples\u003c\/a\u003e\u003c\/p\u003e\n  \u003cbr \/\u003e\n  \u003c\/div\u003e\n\u003cbr \/\u003e\n\u003c\/div\u003e\n","brand":"WMD Devices","offers":[{"title":"WMD Device Geiger Counter Digital Destruction Distortion Pedal","offer_id":49437612,"sku":"","price":299.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/geigercounterbig.jpg?v=1279980490"},{"product_id":"coldcraft-effects-cascade-dual-overdrive-pedal","title":"Coldcraft Effects CASCADE Dual Overdrive Pedal","description":"\u003ch1\u003eColdcraft Effects CASCADE Dual Overdrive Pedal\u003c\/h1\u003e\r\n\u003cdiv\u003e\u003cbr \/\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv\u003eThe first thing you will notice about the Coldcraft CASCADE Dual Overdrive pedal is the two Drive knobs. The second thing you will realize is that the CASCADE allows you to combine a warm, thick Class A voiced gain stage with a crisp, articulate Class A\/B stage. Not only do you have the best of both worlds, but the CASCADE combines both circuits in series for solid rock tones with complex harmonics.\u003c\/div\u003e\r\n\u003cdiv\u003e\u003cbr \/\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv\u003eThe CASCADE has a naturally open amp-like tone, due to the critically voiced, passive Tone Cut Control. No nasally mid-humps or scoops here. The Cut control allows you to gently roll off the highs to warm up the sound, or bring them back in for overdriven crunch and bite.\u003c\/div\u003e\r\n\u003cdiv\u003e\u003cbr \/\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv\u003eOn its own, Drive A provides a warm foundation tone. Drive B brings in the crisp, articulate highs and punchy lows of a great, vintage stack. Blend them together for complex, harmonic crunch and tailor the treble to your rig with the Cut.\u003c\/div\u003e\r\n\u003cdiv\u003e\u003cbr \/\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv\u003eCrank the channels together or individually for thick, harmonic laden crunch and stack-like distortion.\u003c\/div\u003e\r\n\u003cdiv\u003e\u003cbr \/\u003e\r\n\u003c\/div\u003e\r\n\u003ch3\u003eControls\u003c\/h3\u003e\r\n\u003cdiv\u003e\r\n  \u003cul\u003e\r\n    \u003cli\u003eDrive A\u003c\/li\u003e\r\n    \u003cli\u003eDrive B\u003c\/li\u003e\r\n    \u003cli\u003eTreble Cut\u003c\/li\u003e\r\n    \u003cli\u003eVolume\u003c\/li\u003e\r\n  \u003c\/ul\u003e\r\n  \u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv\u003e\r\n  \u003cul\u003e\r\n    \u003cli\u003eClass A \u0026amp; A\/B Drive Circuits\u003c\/li\u003e\r\n    \u003cli\u003eCritically Voiced Treble Cut\u003c\/li\u003e\r\n    \u003cli\u003e1M Ohm Input Impedance\u003c\/li\u003e\r\n    \u003cli\u003eLow Output Impedence\u003c\/li\u003e\r\n    \u003cli\u003eTrue Bypass\u003c\/li\u003e\r\n    \u003cli\u003e9v DC Operation Only (no battery, adapter sold separately)\u003c\/li\u003e\r\n    \u003cli\u003ePowder Coat Finish\u003c\/li\u003e\r\n    \u003cli\u003eSuper Bright Blue LED\u003cbr \/\u003e\r\n    \u003c\/li\u003e\r\n  \u003c\/ul\u003e\r\n  \u003cdiv\u003e\r\n    \u003ch2\u003eColdcraft Effects CASCADE Dual Overdrive Pedal Video Demo\u003c\/h2\u003e\r\n    \u003cdiv\u003e\u003cobject width=\"640\" height=\"360\"\u003e\u003cparam name=\"movie\" value=\"http:\/\/www.youtube.com\/v\/rjKtxzozlGk\u0026amp;hl=en_US\u0026amp;feature=player_embedded\u0026amp;version=3\"\u003e\u003cparam name=\"allowFullScreen\" value=\"true\"\u003e\u003cparam name=\"allowScriptAccess\" value=\"always\"\u003e\u003cembed src=\"http:\/\/www.youtube.com\/v\/rjKtxzozlGk\u0026amp;hl=en_US\u0026amp;feature=player_embedded\u0026amp;version=3\" type=\"application\/x-shockwave-flash\" allowfullscreen=\"true\" allowscriptaccess=\"always\" width=\"640\" height=\"360\"\u003e\u003c\/object\u003e\u003cbr \/\u003e\r\n    \u003c\/div\u003e\r\n    \u003cdiv\u003e\u003cbr \/\u003e\r\n    \u003c\/div\u003e\r\n  \u003cbr \/\u003e\r\n  \u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cbr \/\u003e\r\n","brand":"Coldcraft Effects","offers":[{"title":"Default Title","offer_id":149065942,"sku":"","price":209.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/cold_craft_cascade__99103_zoom_1.png?v=1319647561"},{"product_id":"geargas-effects-firenzi-drive-overdrive-pedal","title":"Geargas Effects Firenzi Drive Overdrive Pedal","description":"\u003cdiv style=\"font-weight: inherit;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eThe Geargas Effects Firenzi Drive is based on the silver-era of one of the most coveted pedals in pedal history. The Firenzi Drive incorporates the exact same pop-free, buffered bypass system as the original.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eHand made and hand powder coated white with a white label on top for controls.\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"font-weight: inherit;\"\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv style=\"font-size: 11pt;\"\u003e\n\u003cp style=\"font-weight: inherit; line-height: 22px; font: normal normal normal 15px\/normal 'Helvetica Neue'; color: #333233; margin: 0px;\"\u003e\u003cb\u003eThis version is assembled and tested by hand in our shop.\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Geargasstore Custom Shop","offers":[{"title":"Default Title","offer_id":4114718212,"sku":"GGS-FD","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/12.JPG?v=1439051838"},{"product_id":"byoc-chancellor-distortion-pedal-assembled","title":"BYOC Chancellor Distortion Pedal Assembled","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eThis version is hand assembled and tested in the USA by geargasstore.\u003cbr\u003e\u003cbr\u003eBased on the Marshall Guv'nor, the BYOC Chancellor kit is another true-bypassed version of one of the designs from Marshall's fantastic early big box era series pedals. The Shredmaster was a full on distortion. The Blues Breaker was a quintessential overdrive. The Chancellor lies somewhere in between. The best word to describe this pedal is crunchy. It's like have a cranked JCM800 full stack in a box. The BYOC Chancellor is true to the original circuit, but with true bypass, higher quality components, and half the size.\u003cbr\u003e\u003cbr\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe BYOC Chancellor distortion pedal can be run off a single 9v battery or 9v Boss style DC adaptor.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eWe are a BYOC Effects Authorized Dealer!\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cb\u003eFeatures:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eTrue bypass\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eBattery power or 9v adapter power\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eControls for Volume, Gain, Treble, Mids and Bass\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe warranty pre-builts for 5 years\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BYOC","offers":[{"title":"Default Title","offer_id":12412941729815,"sku":"BYOC-CHANCELLOR-ASSEMBLED","price":99.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/20160814_155754.jpg?v=1471217369"},{"product_id":"byoc-the-swede-distortion-pedal-assembled","title":"BYOC The Swede Distortion Pedal Assembled","description":"\u003cp\u003eThis is a proper Boss HM-2 clone. If you haven't heard of the HM-2, you should. This pedal is gritty, brutal, rude, and has that unmistakable buzz-saw sound many metal heads love. This pedal has the original M5218L chips as found in the Japanese version, true-bypass switching, and enough salt to strip your neighbors paint. Available with the unpainted enclosure, or with black powder coat and orange screen print. \u003cbr\u003e\u003cbr\u003eThe complete \u0026amp; painted pedal is shown with four orange 1900 style knobs, red LED, black power jack with internal nut, and paint\/silk screen option. Paint\/silk this kit is in black coat w\/ orange lettering.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eThe BYOC The Swede distortion pedal can be run off a single 9v battery or 9v Boss style DC adaptor.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eWe are a BYOC Effects Authorized Dealer!\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cb\u003eFeatures:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eTrue bypass\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eBattery power or 9v adapter power\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eControls for Low, High, Level and Distortion\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe warranty pre-builts for life for the original owner.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BYOC","offers":[{"title":"Default Title","offer_id":24932010376,"sku":"SWEDE-PREBUILT","price":99.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/swede_large_252395e0-06e8-4341-9005-9145272de29d.jpg?v=1471699917"},{"product_id":"byoc-855-drive-overdrive-pedal-assembled","title":"BYOC 855 Drive Overdrive Pedal Pre-Built","description":"\u003cp\u003eDo you wish the Tubescreamer had more gain, less mids, and more low end?  If so, you will love the BYOC 855 Drive.  The Ibanez OD855 is a close cousin of the Ibanez TS808. While the circuits are  very similar, the OD855 is more than just a modified Tubescreamer.  The BYOC 855 Drive kit is almost spot on to the original. We use the 4558D chip, 1N60 germanium clipping diodes, and  tantalum caps in all the same places as the original. The only difference between the BYOC 855  Drive and the original OD855 is that we got rid of the FET bypass circuit and replaced it with true  mechanical bypass, and we replaced the 1uf electrolytic caps in the signal path with higher quality film caps. The orignals are selling for insane amounts of money now. \u003c\/p\u003e\n\u003cp\u003eHere's your chance to try out this other legendary Ibanez effect for a fraction of the cost.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe are an authorized BYOC Dealer.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eTrue bypass\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eBattery power or 9v adapter power\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eControls for Low, High, Level and Distortion\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe warranty pre-builts for life for the original owner.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BYOC","offers":[{"title":"Default Title","offer_id":24955609416,"sku":"855DRIVE","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/IMG_20160821_134522_2016-08-21T17_51_40.802.jpg?v=1471802015"},{"product_id":"byoc-green-pony-overdrive-pedal-green-powder-coat-assembled","title":"BYOC Green Pony Overdrive Pedal Green Powder Coat Pre-Built","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eThe OD-820 was Maxon's answer to the popularity of the Klon Centaur. While it's not a clone of the Centaur, it still employs the same dual-ganged drive knob concept that gives the Centaur its ability to go from a completely clean transparent boost to an overdrive and an internal charge pump that takes your standard 9 volt power supply and increases the voltage for extra headroom. Where the two circuits really differ though is in the actual distortion circuit. The OD-820 uses Maxon's (and Ibanez's) famous Tubescreamer circuit. This is a huge advantage for DIY-ers since there are many well documented modifications for the Tubescreamer, and most of them apply to the OD-820. \u003cbr\u003e\u003cbr\u003eAnother place where the OD-820 circuit differs is in the way its dual-ganged drive knob works. As you turn up the gain on the Centaur, it shunts clean signal to ground. And as you turn down the gain on the Centaur, it shunts the overdrive signal to ground. The Centaur sounds amazing with the gain knob mostly clockwise or mostly counter clockwise, but this method of gain control causes some tone loss when the drive knob is set more towards the middle, the same way adding a master volume control to a tube amp does. It's not much, but it is noticeable, especially when you A\/B it with an OD-820. The OD-820's drive knob doesn't shunt any signal to ground, so it keeps your tone and pick sensitivity fully intact throughout the entire rotation of the drive knob.\u003cbr\u003e\u003cbr\u003eThe BYOC Green Pony is based on the Maxon OD-820, but we've added all the obligatory Tubescreamer mods as stock options. On the outside, you'll notice we've added a NORM\/THIN\/FAT switch which allows you to modify the bass response and gain and a LED\/NONE\/Si switch that allows you to modify the clipping. On the inside, we made the Si (silicon) clipping asymmetrical and changed the value of one of the capacitors in a low pass filter so that it doesn't cut as much treble, thus reducing the dreaded mid-range hump. \u003cbr\u003e\u003cbr\u003eAnother neat thing about the OD-820 is that it has a JFET input buffer that uses the 2SK246 transistor just like the BOSS FA-1 FET PreAmp. The kit comes with parts to do the FA-1 mod to give the the Green Pony's \"clean boost\" function that same jangly high impedance JFET sparkle. This has been applied to this pedal build.\u003cbr\u003e\u003cbr\u003eIf you're a fan of the Tubescreamer, you absolutely must build this kit, because it is going to be your new favorite overdrive. This isn't just another modified Tubescreamer. If you're a fan of the Klon Centaur, you should give this a try. It has less noise, a fuller frequency response, no dull spots in the middle of the drive pot's rotation, and it has true mechanical bypass.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a brand new kit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWe are an authorized BYOC Dealer.\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eFA-1 mod is applied.\u003c\/li\u003e\n\u003cli\u003eBattery power or 9v adapter power.\u003c\/li\u003e\n\u003cli\u003eControls for Level, Tone and Drive.\u003c\/li\u003e\n\u003cli\u003eNORM\/THIN\/FAT switch to modify the bass response and gain.\u003c\/li\u003e\n\u003cli\u003eLED\/NONE\/Si switch to modify the clipping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eWe warranty pre-builts for 5 years.\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"BYOC","offers":[{"title":"Default Title","offer_id":27906385051671,"sku":"BYOC-GREENPONY-ASSEMBLED","price":109.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/files\/20230520_103134.jpg?v=1684594625"},{"product_id":"byoc-blue-overdrive-pedal-w-fat-mod-new-blue-powder-coat-silkscreened-assembled","title":"BYOC Blue Overdrive Pedal w\/Fat Mod New Blue Powder Coat Silkscreened Pre-Built","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eThe BOSS BD-2 is one of the most loved current production pedals. It offers a massive range of gain from a nearly perfect clean boost an almost full-on distortion. It is a FET based overdrive that offers a nice alternative to all the tube screamer and klon based clones. It is touted as being able to reproduce the tone of not just a tube amp, but an old tube amp. The BYOC Blue Overdrive provides all the tone of the original BD-2, but with all metal film resistors and capacitors and true bypass, it delivers it with less noise and zero tone suck when in bypass. The BD-2 is also one of the best circuits to modify. The BYOC Blue Overdrive is a lot easier to modify than a stock BOSS pedal. \u003cbr\u003e\u003cbr\u003eThe applied mod pack for the Blue Overdrive contains parts to perform one of the most common BD-2 mods, often referred to as the \"fat mod\". All the ceramic disc and aluminum electrolytic caps in the signal path are replaced with expensive silver mica and tantalum capacitors. This helps smooth out some of the harshness and fuzziness. Larger forward voltage 1N4002 diodes provide asymmetrical clipping. This creates more second order harmonics and also smooths out some of the fuzziness. The input capacitor value is increased to allow more of your guitars signal in. And one of the decoupling capacitors is placed on a toggle switch to allow you to switch between normal and \"fat\" mode. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a brand new kit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWe are an authorized BYOC Dealer.\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003eBattery power or 9v adapter power\u003c\/li\u003e\n\u003cli\u003eControls for Level, Tone and Drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eWe warranty pre-builts for life for 5 years.\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"BYOC","offers":[{"title":"Default Title","offer_id":37009602888,"sku":"BYOC-BLUEOVERDRIVE-ASSEMBLED","price":122.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600_2.jpg?v=1496073361"},{"product_id":"byoc-lil-gray-od-pedal-new-gray-powder-coat-silkscreened-assembled","title":"BYOC Lil Gray OD Pedal New Gray Powder Coat Silkscreened ASSEMBLED","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv\u003e\u003cspan face=\"Arial\" style=\"font-family: Arial;\"\u003eA clone of the 1976 gray box DOD 250 preamp overdrive, but in a significantly smaller package.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eFeatures all through-hole components and full-sized, panel-mounted hardware.\u003c\/span\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cb\u003eThis version is assembled and tested by hand in our shop from a brand new kit.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWe are an authorized BYOC Dealer.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eTrue bypass\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003e9v adapter power only\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eControls for Volume and Drive.\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe warranty pre-builts for 5 years.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BYOC","offers":[{"title":"Default Title","offer_id":40939952392,"sku":"BYOC-LIL-GRAY-OD","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600_16.jpg?v=1500304453"},{"product_id":"byoc-classic-overdrive-new-assembled-green-powder-coat-silkscreen","title":"BYOC Classic Overdrive New ASSEMBLED Green Powder Coat Silkscreen","description":"\u003cp\u003eWe've got the Overdrive II kit, which is the Rolls Royce of all Tube Screamer clones. But we were still getting tons of requests for a simple, straight forward TS-808 clone. So here you go.... This is our no non-sense Tube Screamer clone kit. No modifications. No fancy switches. Just pure TS-808 specs with the original JRC4558D chip and the highest quality components so you can build your own handwired, true bypass, Tube Screamer. Get all the tone of the original TS-808 Tubescreamer at a fraction of what the reissues and boutique versions cost.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a brand new kit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWe are an authorized BYOC Dealer.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003eBattery power or 9v adapter power (both not included)\u003c\/li\u003e\n\u003cli\u003eControls for Level, Drive and Tone.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe warranty pre-builts for 5 years.\u003c\/strong\u003e\u003c\/p\u003e","brand":"BYOC","offers":[{"title":"Default Title","offer_id":44454914760,"sku":"BYOC_CLASSIC_OVERDRIVE_ASSEMBLED","price":79.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600_18.jpg?v=1503518138"},{"product_id":"byoc-crown-jewel-distortion-pedal-new-assembled-with-all-modules-and-dry-blend","title":"BYOC Crown Jewel Distortion Pedal New ASSEMBLED WITH ALL MODULES and Dry Blend","description":"\u003cstrong\u003eThis Crown Jewel is powder coated purple and silkscreened straight from BYOC. All 11 standard modules are included and the dry blend board is installed as well.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Crown Jewel from Build Your Own Clone is the ultimate drive and boost combo. It is not a clone of anything. It is an amalgamation of the best qualities from many different circuits to create something entirely new that is capable of producing a range of overdrive and distortion tones like no other analog pedal has before.\u003cbr\u003e\u003cbr\u003eWith a parametric midrange, and 3-way Mid Q switch, the 3-band equalizer allows you to voice the drive channel in almost any way imaginable.\u003cbr\u003e\u003cbr\u003eThe hard and soft clipping switches allow you to select 9 different textures of distortion. Hard Ge (Germanium) clipping is similar to the clipping in the Klon Centaur, Maxon OD-855, and MXR Dist +. Hard Si (Silicon) clipping is similar to DOD 250, ProCo RAT, Marshall Shredmaster, Fulltone OCD*, Boss MT-2, and Boss DS-1. Soft Si clipping is similar to the Ibanez Tubescreamer, Boss SD-1, Boss OD-1, Zendrive*, Marshall Blues Breaker, King of Tone, and Timmy. There’s also Soft LED clipping or no clipping at all. And you can also use soft and hard clipping simultaneously like the Boss HM-2, DOD FX53, and other more obscure dirt pedals.\u003cbr\u003e\u003cbr\u003eThe Crown Jewel has an internal charge pump that provides 18 volts to the drive channel circuit while still using your standard 9VDC negative tip power supply. The 18V\/9V switch lets you decide how much voltage is supplied to the drive channel. Use 18V when you need more headroom or output. Use 9V for more traditional overdrive and distortion characteristics.\u003cbr\u003e\u003cbr\u003eThe boost channel is completely independent from the drive channel. You can turn it on and off even if the drive channel is off. The boost channel is modular. The Crown Jewel has many different boost modules to choose from and we are adding more. Changing the module is easy. Just remove the back of the enclosure, pull out the old module from its socket, and plug in the new module. This Crown Jewel comes with all of the following modules: \u003cbr\u003e\n\u003col\u003e\n\u003cli\u003e18V JFET\u003c\/li\u003e\n\u003cli\u003e27V Boost\u003c\/li\u003e\n\u003cli\u003eMOSFET\u003c\/li\u003e\n\u003cli\u003eLPB\u003c\/li\u003e\n\u003cli\u003eGermanium Treble Booster\u003c\/li\u003e\n\u003cli\u003eElectra Distortion\u003c\/li\u003e\n\u003cli\u003eOctave Up\u003c\/li\u003e\n\u003cli\u003eHard Clipper\u003c\/li\u003e\n\u003cli\u003eSoft Clipper\u003c\/li\u003e\n\u003cli\u003eMimosa\u003c\/li\u003e\n\u003cli\u003eFuzz\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe first\/last switch allows you to place the boost channel before the drive channel or after the drive channel. Placing the boost after the drive simply allows you to make your drive louder and impart whatever tonal characteristics the boost module adds. Placing the boost before the drive channel allows you to “stack” your boost with your drive for hotter overdrive tones, or use the boost as a pre-gain for tones similar to the Boss HM-2, DS-1, MT-2, and other high gain distortions.\u003cbr\u003e\u003cbr\u003eThe finishing touch on the Crown Jewel is the soft touch, clickless, pop-free, true-bypass, relay switching for both the drive and boost channels.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a brand new kit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWe are an authorized BYOC Dealer.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003e9v adapter power only (not included)\u003c\/li\u003e\n\u003cli\u003eControls for Boost Volume, Mid Freq, Presence, Drive, Drive Level, Treble, Mid, Bass, 2 Diode Selection Switches, Mid Q switch and an 9\/18volt selection switch.\u003c\/li\u003e\n\u003cli\u003eAll the standard modules are included (11 in all):\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e18v JFET Module\u003c\/li\u003e\n\u003cli\u003e27v Boost Module\u003c\/li\u003e\n\u003cli\u003eMosfet Module\u003c\/li\u003e\n\u003cli\u003eLPB Module Germanium Treble Booster Module\u003c\/li\u003e\n\u003cli\u003eElectra Distortion Module\u003c\/li\u003e\n\u003cli\u003eOctave Up Module\u003c\/li\u003e\n\u003cli\u003eHard Clipper Module\u003c\/li\u003e\n\u003cli\u003eSoft Clipper Module\u003c\/li\u003e\n\u003cli\u003eMimosa Module\u003c\/li\u003e\n\u003cli\u003eFuzz Module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe warranty pre-builts for 5 years.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"BYOC","offers":[{"title":"Default Title","offer_id":44905486280,"sku":"BYOC_CROWN_JEWEL","price":350.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/20170828_234217.jpg?v=1503980155"},{"product_id":"byoc-shredder-distortion-pedal-new-assembled","title":"BYOC Shredder Distortion Pedal Pre-Built","description":"\u003cp\u003eSometimes there's a thin line between what's an overdrive, what's a fuzz, and what's a distortion. \u003cbr\u003eThe Marshall Shredmaster is definitely a full on 80's heavy metal distortion. \u003cbr\u003eBut it also has the dynamics to pull off a very nice overdrive tone as well. \u003cbr\u003e\u003cbr\u003eThe BYOC Shredder kit packs all the tone of the original pedal with volume, gain, bass, treble, and contour knobs into a box that is half the size of the original... and with true bypass. It's voiced to turn even a 6 watt open back combo with an 8\" speaker into wall of Marshall full stacks. It's like having a JCM series in a box. Rock on!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a brand new kit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWe are an authorized BYOC Dealer.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003eBattery power or 9v adapter power (both not included)\u003c\/li\u003e\n\u003cli\u003eControls for Volume, Tone, Gain, Bass, Treble.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe warranty pre-builts for 5 years.\u003c\/strong\u003e\u003c\/p\u003e","brand":"BYOC","offers":[{"title":"Default Title","offer_id":45881594248,"sku":"BYOC_SHREDDER_ASSEMBLED","price":99.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600sh1_d11b9358-58ee-403a-b365-72ef6fdb5a28.jpg?v=1544583115"},{"product_id":"byoc-crown-jewel-distortion-pedal-new-assembled-with-one-module-and-dry-blend","title":"BYOC Crown Jewel Distortion Pedal New ASSEMBLED WITH One MODULE and Dry Blend","description":"\u003cstrong\u003eThis Crown Jewel is powder coated black and silkscreened straight from BYOC. One module of your choice is included and the dry blend board is installed as well.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Crown Jewel from Build Your Own Clone is the ultimate drive and boost combo. It is not a clone of anything. It is an amalgamation of the best qualities from many different circuits to create something entirely new that is capable of producing a range of overdrive and distortion tones like no other analog pedal has before.\u003cbr\u003e\u003cbr\u003eWith a parametric midrange, and 3-way Mid Q switch, the 3-band equalizer allows you to voice the drive channel in almost any way imaginable.\u003cbr\u003e\u003cbr\u003eThe hard and soft clipping switches allow you to select 9 different textures of distortion. Hard Ge (Germanium) clipping is similar to the clipping in the Klon Centaur, Maxon OD-855, and MXR Dist +. Hard Si (Silicon) clipping is similar to DOD 250, ProCo RAT, Marshall Shredmaster, Fulltone OCD*, Boss MT-2, and Boss DS-1. Soft Si clipping is similar to the Ibanez Tubescreamer, Boss SD-1, Boss OD-1, Zendrive*, Marshall Blues Breaker, King of Tone, and Timmy. There’s also Soft LED clipping or no clipping at all. And you can also use soft and hard clipping simultaneously like the Boss HM-2, DOD FX53, and other more obscure dirt pedals.\u003cbr\u003e\u003cbr\u003eThe Crown Jewel has an internal charge pump that provides 18 volts to the drive channel circuit while still using your standard 9VDC negative tip power supply. The 18V\/9V switch lets you decide how much voltage is supplied to the drive channel. Use 18V when you need more headroom or output. Use 9V for more traditional overdrive and distortion characteristics.\u003cbr\u003e\u003cbr\u003eThe boost channel is completely independent from the drive channel. You can turn it on and off even if the drive channel is off. The boost channel is modular. The Crown Jewel has many different boost modules to choose from and we are adding more. Changing the module is easy. Just remove the back of the enclosure, pull out the old module from its socket, and plug in the new module. This Crown Jewel comes with your choice of one of the following modules: \u003cbr\u003e\n\u003col\u003e\n\u003cli\u003e18V JFET\u003c\/li\u003e\n\u003cli\u003e27V Boost\u003c\/li\u003e\n\u003cli\u003eMOSFET\u003c\/li\u003e\n\u003cli\u003eLPB\u003c\/li\u003e\n\u003cli\u003eGermanium Treble Booster\u003c\/li\u003e\n\u003cli\u003eElectra Distortion\u003c\/li\u003e\n\u003cli\u003eOctave Up\u003c\/li\u003e\n\u003cli\u003eHard Clipper\u003c\/li\u003e\n\u003cli\u003eSoft Clipper\u003c\/li\u003e\n\u003cli\u003eMimosa\u003c\/li\u003e\n\u003cli\u003eFuzz\u003c\/li\u003e\n\u003cli\u003ePre-Gain\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe first\/last switch allows you to place the boost channel before the drive channel or after the drive channel. Placing the boost after the drive simply allows you to make your drive louder and impart whatever tonal characteristics the boost module adds. Placing the boost before the drive channel allows you to “stack” your boost with your drive for hotter overdrive tones, or use the boost as a pre-gain for tones similar to the Boss HM-2, DS-1, MT-2, and other high gain distortions.\u003cbr\u003e\u003cbr\u003eThe finishing touch on the Crown Jewel is the soft touch, clickless, pop-free, true-bypass, relay switching for both the drive and boost channels.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a brand new kit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWe are an authorized BYOC Dealer.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003e9v adapter power only (not included)\u003c\/li\u003e\n\u003cli\u003eControls for Boost Volume, Mid Freq, Presence, Drive, Drive Level, Treble, Mid, Bass, 2 Diode Selection Switches, Mid Q switch and an 9\/18volt selection switch.\u003c\/li\u003e\n\u003cli\u003eOne of the following standard modules are included (your choice):\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e18v JFET Module\u003c\/li\u003e\n\u003cli\u003e27v Boost Module\u003c\/li\u003e\n\u003cli\u003eMosfet Module\u003c\/li\u003e\n\u003cli\u003eLPB Module Germanium Treble Booster Module\u003c\/li\u003e\n\u003cli\u003eElectra Distortion Module\u003c\/li\u003e\n\u003cli\u003eOctave Up Module\u003c\/li\u003e\n\u003cli\u003eHard Clipper Module\u003c\/li\u003e\n\u003cli\u003eSoft Clipper Module\u003c\/li\u003e\n\u003cli\u003eMimosa Module\u003c\/li\u003e\n\u003cli\u003eFuzz Module\u003c\/li\u003e\n\u003cli\u003ePre-Gain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe warranty pre-builts for 5 years.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"BYOC","offers":[{"title":"Default Title","offer_id":47298873800,"sku":"BYOC_CROWN_JEWEL_ONE_MOD","price":219.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/20200616_183855.jpg?v=1592347586"},{"product_id":"byoc-lil-breaker-overdrive-pedal-new-assembled","title":"BYOC Lil Breaker Overdrive Pedal New ASSEMBLED","description":"The BYOC British Blues Overdrive kit is based on the Marshall Blues Breaker which is quickly becoming a favorite of DIYers and boutique builders as a more transparent sounding alternative to the typical Tubescreamer clones.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a brand new kit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWe are an authorized BYOC Dealer.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003e9v adapter power only (not included)\u003c\/li\u003e\n\u003cli\u003eControls for Volume, Tone and Drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eWe warranty pre-builts for 5 years.\u003c\/strong\u003e","brand":"BYOC","offers":[{"title":"Default Title","offer_id":48173294920,"sku":"BYOC_LIL_BREAKER","price":79.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600_50.jpg?v=1508778059"},{"product_id":"byoc-lil-modified-overdrive-pedal-new-assembled","title":"BYOC Lil Modified Overdrive Pedal New ASSEMBLED","description":"A miniature version of the TS-808 Tubescreamer with all the essential modifications:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased input impedance to allow better clarity of signal.\u003c\/li\u003e\n\u003cli\u003eMore gain when you turn up the drive knob.\u003c\/li\u003e\n\u003cli\u003eAsymmetrical clipping for more second order harmonics.\u003c\/li\u003e\n\u003cli\u003eMore lows to let more of the fat bottom through.\u003c\/li\u003e\n\u003cli\u003eMore highs to allow a bit more sparkle.\u003c\/li\u003e\n\u003cli\u003eCleaner drive control when dialed back so you can use it as a cleaner boost than the regular circuit.\u003c\/li\u003e\n\u003c\/ul\u003e\nFeatures all through-hole components, panel mounted hardware, and true bypass.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a brand new kit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWe are an authorized BYOC Dealer.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003e9v adapter power only (not included)\u003c\/li\u003e\n\u003cli\u003eControls for Volume, Tone and Drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eWe warranty pre-builts for 5 years.\u003c\/strong\u003e","brand":"BYOC","offers":[{"title":"Default Title","offer_id":97224097800,"sku":"BYOC_LIL_MOD_OD","price":69.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600_54.jpg?v=1509201795"},{"product_id":"byoc-lil-yellow-overdrive-pedal-new-assembled","title":"BYOC Lil Yellow Overdrive Pedal New ASSEMBLED","description":"The BYOC Li'l Yellow OD is a clone of the very first Made-in-Japan version BOSS OD-1, except much, much smaller. It has the single quad op amp circuit and features the MC3403 chip, not the double dual op amp circuit with transistor buffers that the later versions have.\u003cbr\u003e\u003cbr\u003eFeatures all through-hole components, and full-sized, panel-mounted hardware.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a brand new kit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWe are an authorized BYOC Dealer.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003e9v adapter power only (not included)\u003c\/li\u003e\n\u003cli\u003eControls for Volume and Drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eWe warranty pre-builts for 5 years.\u003c\/strong\u003e","brand":"BYOC","offers":[{"title":"Default Title","offer_id":97240219656,"sku":"BYOC_LIL_YELLOW_OD","price":69.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600_56.jpg?v=1509201962"},{"product_id":"byoc-kuzco-jr-overdrive-pedal-new-assembled","title":"BYOC Kuzco Jr Overdrive Pedal New ASSEMBLED","description":"This mini pedal is based on the Way Huge Red Llama (which is based on the Craig Anderton Tube Sound Fuzz). The tone of this CD4049 CMOS Hex Buffer based distortion lies somewhere between a fuzz and an overdrive... Kinda like when you overdrive just the preamp section of a tube amp. Maybe that's where the name \"Tube Sound Fuzz\" came from? \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures all through hole components and full-size panel mounted hardware.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a brand new kit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWe are an authorized BYOC Dealer.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003e9v adapter power only(not included)\u003c\/li\u003e\n\u003cli\u003eControls for Volume and Gain.\u003c\/li\u003e\n\u003c\/ul\u003e\nWe warranty pre-builts for 5 years.","brand":"BYOC","offers":[{"title":"Default Title","offer_id":339013632008,"sku":"BYOC_KUZCO_JR","price":79.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600_65.jpg?v=1509856643"},{"product_id":"byoc-lil-mouse-distortion-pedal-new-assembled","title":"BYOC Lil Mouse Distortion Pedal New ASSEMBLED","description":"An exact replica of the iconic ProCo Rat. Comes with an N.O.S. LM308 opamp. Metal film resistors and metallized polyester film capacitors deliver spot on vintage tone and at only a fraction of the original size. Despite its small size, the Li'l Mouse uses all through-hole components and panel mounted hardware. True bypass.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a brand new kit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWe are an authorized BYOC Dealer.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003e9v adapter power only(not included)\u003c\/li\u003e\n\u003cli\u003eControls for Distortion, Volume and Filter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eWe warranty pre-builts for 5 years.\u003c\/strong\u003e","brand":"BYOC","offers":[{"title":"Default Title","offer_id":492232048648,"sku":"BYOC_LIL_MOUSE","price":69.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600_67.jpg?v=1510409867"},{"product_id":"geargas-custom-shop-sabbath-distortion","title":"Geargas Custom Shop Sabbath Distortion","description":"Inspired by a treble booster into a Laney Supergroup amp similar to what Tony Iommi used in the 70s.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMade from a PedalPcb Sabbath Distortion board.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003e9v adapter power only(not included)\u003c\/li\u003e\n\u003cli\u003eControls for Presence, Gain, Volume and Range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eWe warranty our pedals for 5 years.\u003c\/strong\u003e","brand":"Geargasstore Custom Shop","offers":[{"title":"Default Title","offer_id":5859362668583,"sku":"GGS_SABBATH_DISTORTION","price":89.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600_83.jpg?v=1511752930"},{"product_id":"geargas-custom-shop-wrectifier-distortion-pedal","title":"Geargas Custom Shop Wrectifier Distortion Pedal","description":"Modeled after a Mesa Boogie Triple Rectifier.\u003cbr\u003e\u003cbr\u003eWe took the core tone of the original, omitted the unnecessary boost circuit and squeezed it into\u003cbr\u003ea more pedalboard friendly package.\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a pedalpcb Wrectifier board.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003e9v adapter power only (not included)\u003c\/li\u003e\n\u003cli\u003eControls for Volume, Gain, Bass, Mid, Treble.\u003c\/li\u003e\n\u003cli\u003eVintage\/Modern Toggle Switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eWe warranty our pedals for 5 years.\u003c\/strong\u003e","brand":"Geargasstore Custom Shop","offers":[{"title":"Default Title","offer_id":6002525405223,"sku":"GGS_WRECTIFIER","price":79.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600_91.jpg?v=1512368735"},{"product_id":"geargas-custom-shop-squeeze-my-lemonade-overdrive-pedal","title":"Geargas Custom Shop Squeeze My Lemonade Overdrive Pedal","description":"\u003cp\u003eThis overdrive will get you close to the Led Zep II album sound. It is really fun to play and will have you playing your own rendition of whole lotta love.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003cbr\u003eVolume – Controls the output volume\u003cbr\u003eFilter – Adjusts the treble content\u003cbr\u003eGain – Controls the amount of distortion\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a pedalpcb Lemonade OD board.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003e9v adapter power only (not included)\u003c\/li\u003e\n\u003cli\u003eControls for Volume, Gain and Filter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe warranty our pedals for 5 years.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Geargasstore Custom Shop","offers":[{"title":"Default Title","offer_id":6340580311079,"sku":"GGS_SMLOD","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600sl1.jpg?v=1514520889"},{"product_id":"geargas-custom-shop-crystal-drive-overdrive-pedal","title":"Geargas Custom Shop Crystal Drive Overdrive Pedal","description":"Helps you recreate 70's arena rock tones similar to what you hear on those old 70's arena rock records. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003cbr\u003eLevel – Controls the output volume\u003cbr\u003eTone – Controls the tone\u003cbr\u003eDrive – Controls the amount of gain\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a pedalpcb crystal drive board.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003e9v adapter power only (not included)\u003c\/li\u003e\n\u003cli\u003eControls for Level, Drive and Tone.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eWe warranty our pedals for 5 years.\u003c\/strong\u003e","brand":"Geargasstore Custom Shop","offers":[{"title":"Default Title","offer_id":6449078370343,"sku":"GG_CRYSTAL_DRIVE","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600cd.jpg?v=1515350569"},{"product_id":"geargas-custom-shop-dirty-sanchez-distortion-pedal","title":"Geargas Custom Shop Dirty Sanchez Distortion Pedal","description":"A 40 watt cranked JTM-45 in a box style tone in a pedal. Lots of gain on tap, from overdrive to distortion and everything in between.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003cbr\u003eBass – Controls the bass frequencies\u003cbr\u003eTreble – Controls the treble frequencies\u003cbr\u003ePresence – Controls the upper mid-range frequencies\u003cbr\u003eVolume – Controls the output volume\u003cbr\u003eMid – Controls the midrange frequencies\u003cbr\u003eGain – Controls the amount of gain\u003cbr\u003eTight Switch – Controls the pre-gain low end frequencies\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a pedalpcb dirty sanchez board.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003e9v adapter power only (not included)\u003c\/li\u003e\n\u003cli\u003eControls for Volume, Bass, Treble, Presence, Mid, Gain and a Tight switch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eWe warranty our pedals for 5 years.\u003c\/strong\u003e","brand":"Geargasstore Custom Shop","offers":[{"title":"Default Title","offer_id":6449134665767,"sku":"GG_DIRTY_SANCHEZ","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/files\/20230712_002040.jpg?v=1689168060"},{"product_id":"geargas-custom-shop-angry-andy-overdrive-pedal","title":"Geargas Custom Shop Angry Andy Overdrive Pedal","description":"British amp in a box style pedal with EQ options that let you shape anywhere from low gain to high gain sounds and switch that selects between different simulated amp wattage sounds. It is really fun to play!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003cbr\u003eVolume – Controls the master output volume\u003cbr\u003eDrive– Controls the amount of signal gain\u003cbr\u003eEQ – Lowpass filter that removes higher frequencies\u003cbr\u003eAir – Similar to amplifier presence control\u003cbr\u003eHeadroom (Toggle) – Toggles between three different “wattage” settings (25W, 50W, 100W)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a pedalpcb angry andy board.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003e9v adapter power only (not included)\u003c\/li\u003e\n\u003cli\u003eControls for Volume, Drive, EQ, Air and a Headroom toggle switch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eWe warranty our pedals for 5 years.\u003c\/strong\u003e","brand":"Geargasstore Custom Shop","offers":[{"title":"Default Title","offer_id":6710517071911,"sku":"GGS_ANGRY_ANDY","price":79.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600aa1.jpg?v=1517066884"},{"product_id":"geargas-custom-shop-angry-kosta-distortion-pedal","title":"Geargas Custom Shop Angry Kosta Distortion Pedal","description":"\u003cp\u003eAmp in a box style pedal modeled after a JCM800.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003cbr\u003eVolume – Controls the master output volume\u003cbr\u003eDrive– Controls the amount of signal gain\u003cbr\u003eTreble – Controls the level of Treble frequencies\u003cbr\u003eMid – Controls the level of Midrange frequencies\u003cbr\u003eBass – Controls the level of Bass frequencies\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a pedalpcb angry charles board.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003e9v adapter power only (not included)\u003c\/li\u003e\n\u003cli\u003eControls for Volume, Drive, Treble, Mid and Bass.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe warranty our pedals for 5 years.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Geargasstore Custom Shop","offers":[{"title":"Default Title","offer_id":6834128945175,"sku":"GGS_ANGRY_KOSTA","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600ak1.jpg?v=1518202655"},{"product_id":"geargas-custom-shop-eternal-burst-overdrive-pedal","title":"Geargas Custom Shop Eternal Burst Overdrive Pedal","description":"\u003cp\u003eVery smooth sounding overdrive. Like a TS only better! Fun to play!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003cbr\u003eLevel – Adjusts the output volume\u003cbr\u003eDrive – Controls the amount of distortion\u003cbr\u003eTone – Add or subtract presence from the effected signal\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a pedalpcb eternal burst board.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003e9v adapter power only (not included)\u003c\/li\u003e\n\u003cli\u003eControls for Volume, Tone and Drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe warranty our pedals for 5 years.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Geargasstore Custom Shop","offers":[{"title":"Default Title","offer_id":6853872123927,"sku":"GGS_ETERNAL_BURST","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600eb1.jpg?v=1518365864"},{"product_id":"geargas-custom-shop-minidrive-overdrive-pedal","title":"Geargas Custom Shop MiniDrive Overdrive Pedal","description":"\u003cp\u003eA great sounding and tweak-able overdrive pedal.\u003cbr\u003eThis is a slimmed down take on the original delivering the same tones while omitting the Boost function for the sake of compactness.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003cbr\u003eVolume – Controls the output volume\u003cbr\u003eTone – Rolls off the high-end and upper harmonics\u003cbr\u003eOverdrive – Controls the amount of distortion\u003cbr\u003eClipping(toggle switch) – Switches between Mosfet and Standard clipping\u003cbr\u003eMode (toggle switch) – Switches between Vintage, Flat Mids, and Comp-Cut mode\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a pedalpcb minidrive board.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003e9v adapter power only (not included)\u003c\/li\u003e\n\u003cli\u003eControls for Volume, Tone and Overdrive and switches for Clipping and Mids mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eWe warranty our pedals for 5 years.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Geargasstore Custom Shop","offers":[{"title":"Default Title","offer_id":6853902073879,"sku":"GGS_MINIDRIVE","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600m1.jpg?v=1518366316"},{"product_id":"geargas-custom-shop-bohemia-overdrive-pedal","title":"Geargas Custom Shop Bohemia Overdrive Pedal","description":"\u003cp\u003eAn amp in a box style pedal that is inspired by a Vox AC30 paired with a rangemaster treble boost in the front. The tone control is very responsive! Very fun to play!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003cbr\u003eVolume – Controls the overall output volume\u003cbr\u003eTone – Adjusts the frequency response\u003cbr\u003eGain – Controls the amount of signal gain\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a pedalpcb bohemia board.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003e9v adapter power only (not included)\u003c\/li\u003e\n\u003cli\u003eControls for Volume, Tone and Gain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe warranty our pedals for 5 years.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Geargasstore Custom Shop","offers":[{"title":"Default Title","offer_id":6881088372759,"sku":"GGS_BOHEMIA","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600bh1.jpg?v=1518617710"},{"product_id":"geargas-custom-shop-thermionic-distortion-pedal","title":"Geargas Custom Shop Thermionic Distortion Pedal","description":"\u003cp\u003eThe Thermionic Distortion provides searing British-flavored high gain tones through any amp.\u003cbr\u003ePedalboard friendly design, 125B footprint with top-mounted jacks.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003cbr\u003eBass – Controls the bass frequencies\u003cbr\u003eTreble – Controls the treble frequencies\u003cbr\u003ePresence – Controls the upper mid-range frequencies\u003cbr\u003eVolume – Controls the output volume\u003cbr\u003eGain – Controls the amount of gain\u003cbr\u003eTight – Controls the pre-gain low end frequencies\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a pedalpcb thermionic distortion board.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003e9v adapter power only (not included)\u003c\/li\u003e\n\u003cli\u003eControls for Bass, Treble, Presence, Volume, Gain and Tight.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe warranty our pedals for 5 years.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Geargasstore Custom Shop","offers":[{"title":"Default Title","offer_id":6910756913175,"sku":"GGS_THERMIONIC","price":79.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600t1_5d038928-feca-445b-8e6f-fba5dbfb9be5.jpg?v=1518913946"},{"product_id":"geargas-custom-shop-nudrive-korg-nutube-based-overdrive-pedal","title":"Geargas Custom Shop NuDrive Korg NuTube Based Overdrive Pedal","description":"The Geargasstore Custom Shop NuDrive is a Korg NuTube 6P1 vacuum tube based overdrive pedal.\u003cbr\u003e\u003cbr\u003eNutube – A new vacuum tube which puts vacuum fluorescent display technology to practical use\u003cbr\u003e\u003cbr\u003eNutube, similar to a conventional vacuum tube, has an anode grid filament structure, and operates exactly as a triode vacuum tube. Also similar to a vacuum tube, it creates the same characteristic rich overtones.\u003cbr\u003eBy applying their vacuum fluorescent display technology, Noritake Itron Corp., a Noritake Co. Ltd affiliated company, have devised a structure which achieves substantial power saving, miniaturization, and quality improvements when compared with a conventional vacuum tube.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eVolume\u003c\/li\u003e\n\u003cli\u003eTone\u003c\/li\u003e\n\u003cli\u003eDrive\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a pedalpcb nudrive board.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003e9v adapter power only (not included)\u003c\/li\u003e\n\u003cli\u003eControls for Volume, Tone and Drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eWe warranty our pedals for 5 years.\u003c\/strong\u003e","brand":"Geargasstore Custom Shop","offers":[{"title":"Default Title","offer_id":7011438297111,"sku":"GGS_NUDRIVE","price":119.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600nd.jpg?v=1520436484"},{"product_id":"geargas-custom-shop-tweed-sound-drive-overdrive-pedal","title":"Geargas Custom Shop Tweed Sound Drive Overdrive Pedal","description":"An amp in a box style pedal. This one is inspired by a 1959 Tweed Fender Bassman Amplifier.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003cbr\u003eVolume – Adjust output volume level\u003cbr\u003eTone – Adjust treble content\u003cbr\u003eDrive – Sets the amount of distortion (may crackle)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a pedalpcb tweed sound board.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003e9v adapter power only (not included)\u003c\/li\u003e\n\u003cli\u003eControls for Volume, Tone and Drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eWe warranty our pedals for 5 years.\u003c\/strong\u003e","brand":"Geargasstore Custom Shop","offers":[{"title":"Default Title","offer_id":7022833434647,"sku":"GGS_TSD","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600ts1.jpg?v=1520611413"},{"product_id":"geargas-custom-shop-cobalt-drive-overdrive-pedal","title":"Geargas Custom Shop Cobalt Drive Overdrive Pedal","description":"\u003cp\u003eA wonderful creamy overdrive which can be pushed into crunchy goodness. This pedal sounds great!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003cbr\u003eLevel– Controls the output volume\u003cbr\u003eTone – Adjusts the tonal response\u003cbr\u003eGain – Controls the amount of signal gain\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a pedalpcb cobalt drive board.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003e9v adapter power only (not included)\u003c\/li\u003e\n\u003cli\u003eControls for Level, Tone and Gain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe warranty our pedals for 5 years.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Geargasstore Custom Shop","offers":[{"title":"Default Title","offer_id":12273208623127,"sku":"GGS_COBALT_DRIVE","price":69.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600cd1.jpg?v=1529265319"},{"product_id":"geargas-custom-shop-celestial-drive-overdrive-pedal","title":"Geargas Custom Shop Celestial Drive Overdrive Pedal","description":"A great screamer style overdrive with a more responsive tone control! You will love it!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003cbr\u003eVolume – Controls the output volume\u003cbr\u003eTone – Controls the tone\u003cbr\u003eGain– Controls the amount of signal gain\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a pedalpcb celestial drive board.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003e9v adapter power only (not included)\u003c\/li\u003e\n\u003cli\u003eControls for Volume, Tone and Gain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eWe warranty our pedals for 5 years.\u003c\/strong\u003e","brand":"Geargasstore Custom Shop","offers":[{"title":"Default Title","offer_id":12542596317207,"sku":"GGS_CELESTIAL_DRIVE","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600c1_6600bcde-6772-4ed2-9d57-5d52a1640a78.jpg?v=1534632381"},{"product_id":"geargas-custom-shop-six-string-stinger-overdrive-pedal","title":"Geargas Custom Shop Six String Stinger Overdrive Pedal","description":"An amp in a box pedal modelled after the Dumble Steel String Singer.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003cbr\u003eVolume – Controls the output volume\u003cbr\u003eGain – Controls the amount of signal gain\u003cbr\u003eTone\/Filter – Adjusts the midrange emphasis\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a pedalpcb six string stinger board.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003e9v adapter power only (not included)\u003c\/li\u003e\n\u003cli\u003eControls for Volume, Gain and Tone.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eWe warranty our pedals for 5 years.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e","brand":"Geargasstore Custom Shop","offers":[{"title":"Default Title","offer_id":12586270064663,"sku":"GGS_SIXSTRINGSTINGER","price":59.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600ss1.jpg?v=1535460403"},{"product_id":"byoc-fet-preamp-pedal-new-assembled","title":"BYOC FET Preamp Pedal New ASSEMBLED","description":"\u003cp\u003eThe BYOC FET PreAmp kit is an almost exact replica of the legendary and discontinued BOSS FA-1 FET AMP made famous by The Edge. We say \"an almost exact replica\" because the only difference is that we've added a true bypass footswitch so that you can turn it on and off just like a real stompbox. The BYOC FET PreAmp kit comes with Hitachi HA1457W opamps and an NOS Toshiba 2SK246 JFET which are the exact same semiconductors used in the original FA-1. The BYOC FET PreAmp also adds a few upgrades by using higher quality components than the original such as 1% metal film resistors and higher quality film capacitors anywhere it was possible. The BYOC FET PreAmp is more than just a necessity for someone in a U2 cover band. This is one of the most amazing boosts and tone shaping tools you'll ever use. Even with 26dB of gain, the tone is extremely clean with a very crisp and snappy pick attack that will make your tube amp break up very easily. The 2-band Baxandall based EQ is extremely versatile. Not only can it boost \u0026amp; cut treble and bass, but it can cut mids by simultaneously turning up the treble and bass. And it can boost mids by simultaneously cutting treble and bass to make your guitar tone standout from the rest of the mix. But at the same time, it can remain entirely transparent if you just keep the knobs at noon. The BYOC FET PreAmp is an amazing tone tool that every player should have. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a brand new kit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWe are an authorized BYOC Dealer.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003eBattery power or 9v adapter power\u003c\/li\u003e\n\u003cli\u003eControls for Volume, Bass, Treble and a Flat\/Low Cut switch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe warranty pre-builts for 5 years.\u003c\/strong\u003e\u003c\/p\u003e","brand":"BYOC","offers":[{"title":"Default Title","offer_id":12714333896727,"sku":"BYOC_FET_PREAMP","price":99.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600fp1.jpg?v=1537805435"},{"product_id":"byoc-silver-pony-2-overdrive-pedal-new-assembled-silver-powder-coat","title":"BYOC Silver Pony 2 Overdrive Pedal New ASSEMBLED Silver Powder Coat","description":"The BYOC Silver Pony II takes one the most innovative and sought after overdrive circuits of all time and expands it into a dual channel overdrive with a few extras. \u003cbr\u003e\u003cbr\u003eThe drive channel is a faithful klone of the original circuit. The clipping switch lets you choose between Germanium diode clipping for the smooth, compressed sound of the original, Silicon diode clipping for a crunchier, more open sound, and LED (light emitting diode) clipping for a gritty, completely uncompressed distortion. \u003cbr\u003e\u003cbr\u003eOne of the things this circuit is famous for is its ultra-clean and super transparent boost capabilities. But to use it as such, you have to stop playing, bend over, and turn the gain knob all the way down. You only get one or the other. There’s no way to switch between both with just the press of a button…till now. We dissected the clean boost portion of the circuit and made it into a separate boost channel. So now you can have the best of both worlds. And the boost channel is entirely independent of the overdrive channel. This means you can use it to boost the output of the overdrive channel for solos or you can use it as just a clean boost all on its own.\u003cbr\u003e\u003cbr\u003eThe complete and painted pedal as shown is what you get with brown 1400 style knobs, red LEDs. Paint\/silk screen is a Polished Chrome powder coat w\/ black lettering.\u003cbr\u003eThis pedal is complete and ready to play. Power adapter or battery is required but not included.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eBoost: This controls the volume of the boost channel. The boost channel is wired behind the OD circuit, so it can act as a master volume if you have both channels activated.\u003c\/li\u003e\n\u003cli\u003eOutput: This controls the amount of volume for the OD circuit.\u003c\/li\u003e\n\u003cli\u003eTreble: Boosts or cuts the treble.\u003c\/li\u003e\n\u003cli\u003eGain: Controls the amount of gain.\u003c\/li\u003e\n\u003cli\u003eSi-LED-Ge Switch: Selects between three different hard clipping configurations.\u003cbr\u003eSi = 1N4148 diodes\u003cbr\u003eLED = Clipping LEDs\u003cbr\u003eGe = Germanium Diodes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a brand new kit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWe are an authorized BYOC Dealer.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuffered bypass\u003c\/li\u003e\n\u003cli\u003eBattery power or 9v 2.1mm center negative adapter power (not included) only. Do not use anything other than 9v or you will damage the charge pump.\u003c\/li\u003e\n\u003cli\u003eControls for Boost, Output, Treble and Gain and a three mode diode clipping selection switch.\u003c\/li\u003e\n\u003cli\u003eBoost Channel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe warranty pre-builts for 5 years.\u003c\/strong\u003e\u003c\/p\u003e","brand":"BYOC","offers":[{"title":"Default Title","offer_id":12840749367319,"sku":"BYOC_SILVER_PONY2","price":139.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600sp1.jpg?v=1540668176"},{"product_id":"geargas-custom-shop-angry-andy-plus-distortion-pedal","title":"Geargas Custom Shop Angry Andy Plus Distortion Pedal","description":"British amp in a box style pedal with EQ options that let you shape anywhere from low gain to high gain sounds and switch that selects between different simulated amp wattage sounds. The plus version includes a boost. It is really fun to play!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003cbr\u003eGain (Footswitch) – Toggles Gain stage on\/off\u003cbr\u003eVolume – Controls the master output volume\u003cbr\u003eDrive– Controls the amount of signal gain\u003cbr\u003eEQ – Lowpass filter that removes higher frequencies\u003cbr\u003eAir – Similar to amplifier presence control\u003cbr\u003eHeadroom (Toggle) – Toggles between three different “wattage” settings (25W, 50W, 100W)\u003cbr\u003eBoost (Footswitch) – Toggles the Boost stage on\/off\u003cbr\u003eBoost – Controls the level of boost (when active)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a pedalpcb angry andy plus board.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003e9v adapter power only (not included)\u003c\/li\u003e\n\u003cli\u003eControls for Volume, Drive, EQ, Air, Boost level and a Headroom toggle switch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eWe warranty our pedals for 5 years.\u003c\/strong\u003e","brand":"Geargasstore Custom Shop","offers":[{"title":"Default Title","offer_id":13012445954071,"sku":"GGS_ANGRYANDY_PLUS","price":79.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600aap1.jpg?v=1543610002"},{"product_id":"geargas-custom-shop-chela-high-gain-overdrive-pedal","title":"Geargas Custom Shop Chela High Gain Overdrive Pedal","description":"Goes from boost to high gain overdrive. The presence brings out or dampens the top end and the 3 band eq allows you to shape your sound. Really fun to play!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003cbr\u003eLevel – Controls the overall output volume\u003cbr\u003eDrive – Controls the amount of overdrive\u003cbr\u003eTreble – Adjusts the level of high frequencies\u003cbr\u003eMid – Adjusts the level of midrange frequencies\u003cbr\u003eBass – Adjusts the level of low frequencies\u003cbr\u003ePresence – Adjusts the level of upper mid frequencies\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a pedalpcb board.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003e9v adapter power only (not included)\u003c\/li\u003e\n\u003cli\u003eControls for Level, Drive, Treble, Mid, Bass and Presence.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eWe warranty our pedals for 5 years.\u003c\/strong\u003e","brand":"Geargasstore Custom Shop","offers":[{"title":"Default Title","offer_id":13040126066711,"sku":"GGS_CHELA","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600ch1.jpg?v=1544458590"},{"product_id":"byoc-parametric-overdrive-pedal-new-assembled","title":"BYOC Parametric Overdrive Pedal New Pre-Built","description":"\u003cp\u003eThe Pearl OD-05 hasn't really caught on with many people yet. Very few of them were produced so not many people have had the chance to play an original. They don't fetch outrageous prices on the vintage market yet, but nonetheless, they are incredibly rare, so even if you've got money in your PayPal account to spend, you can still have a hard time getting a hold of one. The few schematics that are floating around on the internet are all erroneous, including the factory schematic from Pearl. Unless someone took the time to actually reverse engineer an original (like we did), any attempt to clone the pedal would have been a failure. It would \"work\", but it wouldn't sound good, so perhaps that's why the circuit hasn't gained popularity in the DIY\/boutique community. But the people who have had a chance to play an original can tell you that it truly rocks. The parametric tone control is obviously the first thing people notice about the OD-05. It has a massive range from 100Hz to 4kHz, but that's just the icing on the cake. What really makes this overdrive special is it's retention of low frequencies and ability to be perfectly transparent. A transparent overdrive that can boost or cut any frequency, in practically the entire useful spectrum range of a guitar? Yes, please.\u003c\/p\u003e\n\u003cp\u003eThe BYOC Parametric Overdrive is an exact clone of the Pearl OD-05 with true bypass and Q mod - a 3-way switch that allows you to adjust the Q of the parametric EQ from narrow, medium(original specs), or wide. The PCB also has some extra spaces so you can modify the actual OD section to a circuit similar to the TS808, RAT, or other various overdrive circuits that have a similar op amp gain structure...not to mention all the usual clipping and gain mods you can do to dial it in to your exact tastes.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe following modifications have been applied:\u003c\/strong\u003e 1 x .022uF film cap (tighten up low end); 1 x 1k resistor and 1 x 1uF film cap (increases gain and low end); 1 x 1k resistor (reduces minimum gain setting); 2 x 1N4148 (asymmetrical clipping).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a brand new kit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWe are an authorized BYOC Dealer.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003eBattery power or 9v adapter power (both not included)\u003c\/li\u003e\n\u003cli\u003eControls for Level, Boost\/Cut, Drive, Frequency and a toggle switch for Wide\/Narrow\/Medium Parametric Frequency Band.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe warranty pre-builts for 5 years.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"BYOC","offers":[{"title":"Default Title","offer_id":13072399269911,"sku":"GGS_PARAMETRIC_OD","price":99.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600po1.jpg?v=1545672912"},{"product_id":"byoc-mouse-v2-distortion-pedal-new-assembled","title":"BYOC Mouse V2 Distortion Pedal Pre-Built","description":"\u003cp\u003eThe BYOC Mouse is a modified version of the original Proco RAT. It has level, distortion, and filter knobs just like the original, and a 4th presence knob. This is a popular mod for the RAT circuit. It is ofter referred to as the \"Ruetz mod\". It also has a 3-way clipping switch. It has silicon clipping, like the original RAT, LED clipping like the Turbo RAT, and Germanium clipping for an even more saturated fuzzy RAT sound. Comes with an NOS LM308 chip just like the original for that vintage RAT tone.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a brand new kit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWe are an authorized BYOC Dealer.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUpdated Version 2 Model.\u003c\/li\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003eBattery power or 9v adapter power\u003c\/li\u003e\n\u003cli\u003eControls for Level, Distortion, Tone, Presence and a three-way diode clipping switch(Silicon\/LED\/Germanium).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe warranty pre-builts for 5 years.\u003c\/strong\u003e\u003c\/p\u003e","brand":"BYOC","offers":[{"title":"Default Title","offer_id":13109531312151,"sku":"BYOC_MOUSE_V2","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600m21.jpg?v=1546809305"},{"product_id":"byoc-silver-pony-overdrive-pedal-new-powder-coat-assembled","title":"BYOC Silver Pony Overdrive Pedal Pre-Built","description":"The BYOC Silver Pony takes one the most innovative and sought after overdrive circuits of all time and adds a few switchable modifications to make it even more versatile without compromising the tone that made the original pedal such a legend. \u003cbr\u003e\u003cbr\u003eThe Clipping switch allows you to select 3 different types of clipping. GE1 is the original Germanium diode clipping. This produces a very compressed and smooth overdrive. GE2 places a second pair of Germanium diodes in series for clipping with twice the forward voltage. This reduces the compression and produces a slightly crunchier overdrive. Si uses a pair of Silicon diodes for 3x the forward voltage of the original clipping. This produces a very open and crunchy overdrive. \u003cbr\u003e\u003cbr\u003eThe EQ switch allows you to select 3 different bass responses. NORM is the stock setting, producing very a present low midrange. FULL is just that - a nice full frequency response. And FAT provides a slight boost to the bottom end.\u003cbr\u003e\u003cbr\u003eThe Silver Pony employs a mechanical true bypass switching system for the clarity in bypass that only a true bypass circuit can provide. It does NOT have a buffered bypass like the original.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a brand new kit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWe are an authorized BYOC Dealer.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003eBattery power or 9v adapter power\u003c\/li\u003e\n\u003cli\u003eControls for Level, Tone, Gain, Diode Switch and EQ Switch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eWe warranty pre-builts for 5 years.\u003c\/strong\u003e","brand":"BYOC","offers":[{"title":"Default Title","offer_id":27850928291863,"sku":"BYOC_SILVER_PONY","price":99.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/files\/20230525_002716.jpg?v=1684989561"},{"product_id":"byoc-lil-pony-overdrive-pedal-new-assembled","title":"BYOC Lil Pony Overdrive Pedal Pre-Built","description":"\u003cp\u003eThe BYOC Li'l Pony takes all the tone of one the most innovative and sought-after overdrive circuits of all time and shrinks it down to a pocket sized box of tastiness.\u003cbr\u003e\u003cbr\u003eThe complete \u0026amp; painted pedal is shown with painted enclosure option. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis version is assembled and tested by hand in our shop from a brand new kit.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWe are an authorized BYOC Dealer.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003e9v adapter power only\u003c\/li\u003e\n\u003cli\u003eControls for Volume, Treble and Gain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe warranty pre-builts for 5 years.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/H5eHzS0qYWA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"BYOC","offers":[{"title":"Default Title","offer_id":27971217031191,"sku":"BYOC_LIL_PONY","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600_-_2019-06-09T140335.831.jpg?v=1560103617"},{"product_id":"geargas-custom-shop-prometheum-distortion-pedal","title":"Geargas Custom Shop Prometheum Distortion Pedal","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan face=\"Arial\" style=\"font-family: Arial;\"\u003e\u003cspan\u003eThe chainsaw like distortion that Swedish metal bands use.\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003cdiv\u003e\n\u003cspan rwr=\"1\"\u003e\u003cspan face=\"Arial\" style=\"font-family: Arial;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cdiv\u003e\u003cspan face=\"Arial\" style=\"font-family: Arial;\"\u003e\u003cb\u003eControls\u003c\/b\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cb\u003eVolume -\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003econtrols the overall output volume\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cb\u003eDistortion -\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003ethe amount of distortion\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cb\u003eLow\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e- Low Frequency boost\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cb\u003eHigh\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e- High Frequency boost\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e \u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eThis version is assembled and tested by hand in our shop from a pedalpcb prometheum distortion board.\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e \u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eTrue bypass\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003e9v adapter power only (not included)\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eControls for Volume, Distortion, Low and High.\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWe warranty our pedals for 5 years.\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Geargasstore Custom Shop","offers":[{"title":"Default Title","offer_id":29222697697303,"sku":"GGS_PROMETHEUM","price":89.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/s-l1600_-_2019-06-27T175457.789.jpg?v=1561672627"},{"product_id":"byoc-el-distorto-segundo","title":"BYOC El Distorto Segundo NEW Assembled","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eA clone of the MXR Distortion II. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWe took a few liberties\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003elike removing the part of the circuit that handles the bypass and made it true mechanical bypass\u003c\/li\u003e\n\u003cli\u003egiving it asymmetrical clipping as a stock feature (of course you can just leave out the extra clipping diodes if you want)\u003c\/li\u003e\n\u003cli\u003eadding a toggle switch to switch between standard clipping and LED clipping which gives it a crunchier tone\u003c\/li\u003e\n\u003cli\u003eand doing away with the noisy internal power transformer and allowing for a 9V battery or standard guitar effects power supply (9 ~ 18VDC).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBut aside from that, it's true to the original.\u003c\/p\u003e\n\u003cp\u003eThis is a little-known and somewhat rare effect. Although it's not fetching huge vintage prices yet, we decided to make a clone of it because it is such a unique and interesting distortion. There really isn't any other circuit like this, and if you're an avid DIYer, you're probably getting tired of modding the same old distortion\/overdrive circuits, so we thought you guys would enjoy tinkering with this one (unless your a Pumpkins fan, in which case, you'll probably want to leave it just the way it is). It actually has two completely different distortion\/overdrive circuits. The \"resonance\" knob blends the second circuit into the mix. Lots of clipping mods, RC filters, and op amp gain structures to play around with.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cb\u003eWe are a BYOC Effects Authorized Dealer!\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cb\u003eFeatures:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eTrue bypass\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eBattery power or 9v adapter power\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eControls for Volume, Gain, Treble, Mids and Bass\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe warranty pre-builts for 5 years\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Geargas Store","offers":[{"title":"Default Title","offer_id":40429232029763,"sku":"BYOC_DISTORTO_SEGUNDO","price":94.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/20230303_175834.jpg?v=1677885087"},{"product_id":"byoc-crown-jewel-distortion-pedal-new-assembled-with-one-module","title":"BYOC Crown Jewel Distortion Pedal New ASSEMBLED WITH One MODULE","description":"\u003cstrong\u003eThis Crown Jewel is not powder coated but uses the plain enclosure straight from BYOC but with our label. We offer this when stock of powder coated enclosures are out. One module of your choice is included.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Crown Jewel from Build Your Own Clone is the ultimate drive and boost combo. It is not a clone of anything. It is an amalgamation of the best qualities from many different circuits to create something entirely new that is capable of producing a range of overdrive and distortion tones like no other analog pedal has before.\u003cbr\u003e\u003cbr\u003eWith a parametric midrange, and 3-way Mid Q switch, the 3-band equalizer allows you to voice the drive channel in almost any way imaginable.\u003cbr\u003e\u003cbr\u003eThe hard and soft clipping switches allow you to select 9 different textures of distortion. Hard Ge (Germanium) clipping is similar to the clipping in the Klon Centaur, Maxon OD-855, and MXR Dist +. Hard Si (Silicon) clipping is similar to DOD 250, ProCo RAT, Marshall Shredmaster, Fulltone OCD*, Boss MT-2, and Boss DS-1. Soft Si clipping is similar to the Ibanez Tubescreamer, Boss SD-1, Boss OD-1, Zendrive*, Marshall Blues Breaker, King of Tone, and Timmy. There’s also Soft LED clipping or no clipping at all. And you can also use soft and hard clipping simultaneously like the Boss HM-2, DOD FX53, and other more obscure dirt pedals.\u003cbr\u003e\u003cbr\u003eThe Crown Jewel has an internal charge pump that provides 18 volts to the drive channel circuit while still using your standard 9VDC negative tip power supply. The 18V\/9V switch lets you decide how much voltage is supplied to the drive channel. Use 18V when you need more headroom or output. Use 9V for more traditional overdrive and distortion characteristics.\u003cbr\u003e\u003cbr\u003eThe boost channel is completely independent from the drive channel. You can turn it on and off even if the drive channel is off. The boost channel is modular. The Crown Jewel has many different boost modules to choose from and we are adding more. Changing the module is easy. Just remove the back of the enclosure, pull out the old module from its socket, and plug in the new module. This Crown Jewel comes with your choice of one of the following modules: \u003cbr\u003e\n\u003col\u003e\n\u003cli\u003e18V JFET\u003c\/li\u003e\n\u003cli\u003e27V Boost\u003c\/li\u003e\n\u003cli\u003eMOSFET\u003c\/li\u003e\n\u003cli\u003eLPB\u003c\/li\u003e\n\u003cli\u003eGermanium Treble Booster\u003c\/li\u003e\n\u003cli\u003eElectra Distortion\u003c\/li\u003e\n\u003cli\u003eOctave Up\u003c\/li\u003e\n\u003cli\u003eHard Clipper\u003c\/li\u003e\n\u003cli\u003eSoft Clipper\u003c\/li\u003e\n\u003cli\u003eMimosa\u003c\/li\u003e\n\u003cli\u003eFuzz\u003c\/li\u003e\n\u003cli\u003ePre-Gain\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe first\/last switch allows you to place the boost channel before the drive channel or after the drive channel. Placing the boost after the drive simply allows you to make your drive louder and impart whatever tonal characteristics the boost module adds. Placing the boost before the drive channel allows you to “stack” your boost with your drive for hotter overdrive tones, or use the boost as a pre-gain for tones similar to the Boss HM-2, DS-1, MT-2, and other high gain distortions.\u003cbr\u003e\u003cbr\u003eThe finishing touch on the Crown Jewel is the soft touch, click-less, pop-free, true-bypass, relay switching for both the drive and boost channels.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version is assembled and tested by hand in our shop from a brand new kit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWe are an authorized BYOC Dealer.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTrue bypass\u003c\/li\u003e\n\u003cli\u003e9v adapter power only (not included)\u003c\/li\u003e\n\u003cli\u003eControls for Boost Volume, Mid Freq, Presence, Drive, Drive Level, Treble, Mid, Bass, 2 Diode Selection Switches, Mid Q switch and an 9\/18volt selection switch.\u003c\/li\u003e\n\u003cli\u003eOne of the following standard modules are included (your choice):\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e18v JFET Module\u003c\/li\u003e\n\u003cli\u003e27v Boost Module\u003c\/li\u003e\n\u003cli\u003eMosfet Module\u003c\/li\u003e\n\u003cli\u003eLPB Module Germanium Treble Booster Module\u003c\/li\u003e\n\u003cli\u003eElectra Distortion Module\u003c\/li\u003e\n\u003cli\u003eOctave Up Module\u003c\/li\u003e\n\u003cli\u003eHard Clipper Module\u003c\/li\u003e\n\u003cli\u003eSoft Clipper Module\u003c\/li\u003e\n\u003cli\u003eMimosa Module\u003c\/li\u003e\n\u003cli\u003eFuzz Module\u003c\/li\u003e\n\u003cli\u003ePre-Gain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe warranty pre-builts for 5 years.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"BYOC","offers":[{"title":"Default Title","offer_id":40442931052611,"sku":"BYOC_CROWN_JEWELL_GG","price":219.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/20230316_171934.jpg?v=1679002071"},{"product_id":"harby-centauri-overdrive-boost-buffer-guitar-effects-pedal","title":"Harby Centauri Overdrive \/ Boost \/ Buffer Guitar Effects Pedal","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3 class=\"a-spacing-mini\"\u003eHarby Centauri\u003c\/h3\u003e\n\u003ch5 class=\"a-spacing-mini a-color-secondary\"\u003eOverdrive + Clean Boost\u003c\/h5\u003e\n\u003cp class=\"a-spacing-base\"\u003eA modernized, yet highly accurate take on the legendary Klon Centaur overdrive pedal of the 1990’s. The Centauri guitar pedal is built using the highest quality components, including; gold plated PCB (ENIG), genuine Texas Instruments op-amps (TL072), NOS 1N34A germanium clipping diodes with correct forward voltage of 0.35v (±15%), solid anodized aluminum knobs, Neutrik I\/O.\u003c\/p\u003e\n\u003cp class=\"a-spacing-base\"\u003eThe pedal features volume, drive, and tone controls, buffered bypass. The pedal can also be used as a clean boost with the drive knob turned all the way down. The pedal operates at 9 volts DC using a standard negative center power supply.\u003c\/p\u003e\n\u003cdiv class=\"elementor-element elementor-element-ee03fcf elementor-widget elementor-widget-heading\" data-id=\"ee03fcf\" data-element_type=\"widget\" data-widget_type=\"heading.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003ch2 class=\"elementor-heading-title elementor-size-default\"\u003eSpecifications\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"elementor-element elementor-element-2001cd9 elementor-widget elementor-widget-text-editor\" data-id=\"2001cd9\" data-element_type=\"widget\" data-widget_type=\"text-editor.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cdiv class=\"elementor-text-editor elementor-clearfix\"\u003e\n\u003ch6\u003eModernized\u003c\/h6\u003e\n\u003cp\u003eThe original Centaur’s components were attached to the circuit board using “through-hole” techniques, with pins that go through the circuit board and are soldered on its underside. This process got the job done, but it was expensive and time-consuming. Eventually, Bill Finnegan began producing his pedals using surface-mount technology (SMT), attaching the components directly to the circuit board’s face. This is the method we used to design the Harby Centauri.\u003c\/p\u003e\n\u003ch6\u003eTrue to the original\u003c\/h6\u003e\n\u003cp\u003eBill Finnegan once said of his 1N34A germanium clipping diodes that they are “… the most important factor in how the circuit sounds when it’s being used to create distortion.” As a tribute to his insight, the Centauri uses only 1N34A diodes, with an original forward voltage of 0.35v (+ 15%). It’s also built using the original Centaur circuit board layout and features its buffered bypass, rather than the more modern true bypass.\u003c\/p\u003e\n\u003ch6\u003eTechnical\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eOriginal Centaur circuit board layout.\u003c\/li\u003e\n\u003cli\u003eGold-plated PCB (ENIG).\u003c\/li\u003e\n\u003cli\u003eGenuine Texas Instruments op-amps (TL072).\u003c\/li\u003e\n\u003cli\u003eNOS 1N34A germanium clipping diodes with original forward voltage of 0.35v (+15%).\u003c\/li\u003e\n\u003cli\u003eSolid anodized aluminum knobs (volume, drive, and tone controls).\u003c\/li\u003e\n\u003cli\u003eNeutrik input and output jacks.\u003c\/li\u003e\n\u003cli\u003eBuffered bypass.\u003c\/li\u003e\n\u003cli\u003e9v DC operation using a standard negative center power supply.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-widget_type=\"heading.default\" data-element_type=\"widget\" data-id=\"f2be390\" class=\"elementor-element elementor-element-f2be390 elementor-widget elementor-widget-heading\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003ch2 class=\"elementor-heading-title elementor-size-default\"\u003eHistory\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-widget_type=\"text-editor.default\" data-element_type=\"widget\" data-id=\"99158b2\" class=\"elementor-element elementor-element-99158b2 elementor-widget elementor-widget-text-editor\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cdiv class=\"elementor-text-editor elementor-clearfix\"\u003e\n\u003cp\u003eIn 1994, Bill Finnegan made a legendary contribution to the guitar industry: the Klon Centaur overdrive stomp pedal. With a clear, well-articulated sound that’s free from synthetic, solid-state distortion and unnecessary heaviness, the Centaur became a favorite among guitarists everywhere, and its popularity hasn’t declined since.\u003c\/p\u003e\n\u003cp\u003eNot everyone could get their hands on one, though. Finnegan only built 8,000 units, and these days, they command prices in the neighborhood of $7,000. So naturally, many guitarists opened up Centaurs to study the circuit board schematics in order to copy them and build their own. For years, these guitarists were thwarted by a thick layer of epoxy coating every Centaur circuit board. It wasn’t until 2009 that Martin Chittum finally managed to remove the resin from a Centaur and the schematics were revealed.\u003c\/p\u003e\n\u003cp\u003eLike our fellow pedal junkies, we decided to recreate the Centaur to take up less space on your stomp board without sacrificing the original’s clarity and sweetness. Using the original circuit board design and parts that Finnegan himself relied on, the Harby Centauri can be used on any pedal board for a huge range of applications. Use it on its own to juice up your output, get a clean boost with the drive knob turned all the way down, or combine it with fuzz and distortion pedals to add a slightly thicker character to their heavy grit. And with its buffered bypass, the Centauri, like the original Klon Centaur, is never truly off—its mellow, clear tone can always be relied on in the studio and on-stage.\u003c\/p\u003e\n\u003cp\u003eAll that said, we’d never claim that the Centauri is a perfect sonic match to any Klon. Finnegan himself said that the sound varied from Centaur to Centaur, due to the nature of the clipping diodes he used. We’ve simply attempted to replicate the Centaur’s quality and richness through a faithful reconstruction according to Finnegan’s specifications. The results speak for themselves.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Harby","offers":[{"title":"Default Title","offer_id":40455465828419,"sku":"HARBY_CENTAURI","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/Harby-Pedals-Harby-Centauri-top-view_png.webp?v=1679846654"},{"product_id":"harby-noble-tone-overdrive-boost-distortion-guitar-effects-pedal","title":"Harby Noble Tone Overdrive\/Boost\/Distortion Guitar Effects Pedal","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3 class=\"a-spacing-mini\"\u003eRoyal heritage, contemporary form.\u003c\/h3\u003e\n\u003ch5 class=\"a-spacing-mini a-color-secondary\"\u003eOverdrive \/ Boost \/ Distortion\u003c\/h5\u003e\n\u003cp class=\"a-spacing-base\"\u003eTaking inspiration from AnalogMan’s Prince of Tone, the Harby Noble Tone is based on the same schematic to give you the same organic-sounding tube distortion. Built in the USA with high-quality components. And the best part? No waiting list.\u003c\/p\u003e\n\u003ch5 class=\"a-spacing-mini a-color-secondary\"\u003eJust Like the Original\u003c\/h5\u003e\n\u003cp class=\"a-spacing-base\"\u003eThe Noble Tone, like the Prince of Tone, has two internal DIP switches, which add some subtlety to the knob settings and modes. Our pedal also employs the internal treble trimpot to add high-end, as well as the JRC4580D IC (integrated circuit) New Japan Radio, Co., Ltd. chip.\u003c\/p\u003e\n\u003cdiv data-widget_type=\"heading.default\" data-element_type=\"widget\" data-id=\"f2be390\" class=\"elementor-element elementor-element-f2be390 elementor-widget elementor-widget-heading\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cdiv data-widget_type=\"heading.default\" data-element_type=\"widget\" data-id=\"ee03fcf\" class=\"elementor-element elementor-element-ee03fcf elementor-widget elementor-widget-heading\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003ch2 class=\"elementor-heading-title elementor-size-default\"\u003eSpecifications\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-widget_type=\"text-editor.default\" data-element_type=\"widget\" data-id=\"2001cd9\" class=\"elementor-element elementor-element-2001cd9 elementor-widget elementor-widget-text-editor\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cdiv class=\"elementor-text-editor elementor-clearfix\"\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ci\u003eJust Like the Original\u003c\/i\u003e\u003c\/strong\u003e\u003cbr\u003eThe Noble Tone, like the Prince of Tone, has two internal DIP switches, which add some subtlety to the knob settings and modes. Our pedal also employs the internal treble trimpot to add high-end, as well as the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.nisshinbo-microdevices.co.jp\/en\/pdf\/datasheet\/NJM4580_E.pdf\" title=\"JRC4580D NJM4580 Dual Operational Amplifier\" target=\"_blank\"\u003eJRC4580D\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eIC (integrated circuit) New Japan Radio, Co., Ltd. chip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ci\u003eModernized\u003c\/i\u003e\u003c\/strong\u003e\u003cbr\u003eThe MA856 silicon through-hole clipping diodes found in the original Prince of Tone are no longer available or in production. So we use the closest diode currently available for the Noble Tone, the BAS33 silicon through-hole clipping diode. Like the MA856, the BAS33 clips at approximately 0.82v. After comparing the curves on a\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.peakelec.co.uk\/acatalog\/dca75-dca-pro-semiconductor-analyser.html\" title=\"Peak DCA75 Atlas DCA Pro Advanced Semiconductor Analyser\" target=\"_blank\"\u003ePeak DCA75\u003c\/a\u003e—across the current test range—we can confirm that they are a close match to the MA856.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ci\u003eCapabilities\u003c\/i\u003e\u003c\/strong\u003e\u003cbr\u003eThe default position of the internal treble trimpot is turned completely counter-clockwise, but as you turn it up, it will add high-end. The Internal Mids DIP switch will add low-mids to your signal by increasing the filter frequency of the first op-amp gain stage, while the Internal Gain DIP switch (the Turbo switch) will double the gain ratio of the second op-amp stage so that the diodes will clip more easily. The gain modes work just like they do on the Prince of Tone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ci\u003eTechnical\u003c\/i\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJRC4580D New Japan Radio, Co., Ltd. opamp IC chip.\u003c\/li\u003e\n\u003cli\u003eGold plated PCB (ENIG).\u003c\/li\u003e\n\u003cli\u003eBAS33 silicon through-hole clipping diodes with the original voltage of 0.82v.\u003c\/li\u003e\n\u003cli\u003eSolid anodized aluminum knobs.\u003c\/li\u003e\n\u003cli\u003eInternal treble trimpot.\u003c\/li\u003e\n\u003cli\u003eInternal mids and internal gain DIP switches.\u003c\/li\u003e\n\u003cli\u003eNeutrik jacks.\u003c\/li\u003e\n\u003cli\u003eHigh quality foot switch (rated at over 30,000 actuations).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"elementor-heading-title elementor-size-default\"\u003eHistory\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-widget_type=\"text-editor.default\" data-element_type=\"widget\" data-id=\"99158b2\" class=\"elementor-element elementor-element-99158b2 elementor-widget elementor-widget-text-editor\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cdiv class=\"elementor-text-editor elementor-clearfix\"\u003e\n\u003cp\u003eIn 2005, Jim Weider produced what would become one of the era-defining overdrive\/distortion pedals: the King of Tone. Built as a modified Marshall Blues Breaker (yet distinct in terms of diodes, chips, capacitors, and other components), the pedal is actually two overdrive pedals in a single box, giving guitarists a way to preserve their guitars’ tone clarity while adding substantial amounts of overdrive. To this day, the King of Tone remains Analogman’s most popular pedal.\u003c\/p\u003e\n\u003cp\u003eTo gain an audience with the King, though, musicians have to wait their turn. The demand for the King of Tone far surpassed the supply, not to mention the price. These days, a used King of Tone can sell for upwards of $1,700. Then, in 2012, Analogman released the Prince of Tone to help meet demand. Using the KoT’s higher gain circuit option as its base, the PoT maintained its predecessor’s transparency, and its natural-sounding, smooth, tube-style distortion made it an instant success. Today, though, the PoT itself is often out of stock, and Analogman is currently limiting customers to one unit each.\u003c\/p\u003e\n\u003cp\u003eEnter the Harby Pedals Noble Tone. A faithful replication of the original circuit board and schematics, the Noble Tone shares the rich sound that makes both the King and Prince of Tone so desirable. Compatible with almost any amp, the Noble Tone pedal is responsive and lends itself to a wide variety of sounds and applications. Use the low drive settings to clean up the modes and maintain an even level when playing softly, or put it on a higher drive setting to get a brighter, crunchier effect, especially when using the distortion mode. It can easily be stacked with other pedals, but it can also be used by itself to create smooth harmonics.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Harby","offers":[{"title":"Default Title","offer_id":40455466713155,"sku":"HARBY_NOBLE_TONE","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/5922\/products\/Harby-Pedals-Harby-Noble-Tone-top-view_png.webp?v=1679847045"}],"url":"https:\/\/www.geargasstore.com\/collections\/distortion-and-overdrive\/mooer.oembed","provider":"Geargas Store","version":"1.0","type":"link"}